The RESISTOR Medium Stile Door line manufactured by Arch Aluminum & Glass was designed and tested in accordance with the Miami-Dade County Impact Code and the Florida Building Code. The System is a completely tested System, consisting of Extruded Aluminum, Laminated Glass, Tested Hardware, Silicone, Gasket & Anchors. This Entrance System is a Medium Stile Door with 3 ½” Stiles, optional top & bottom rails (3 ½’, 5”, 7 ½” & 10”), Hinging (Offset Pivots, Butts & Continuous), 3 point locking hardware @ active leaf & 2 point @ inactive leaf, Optional Panics (Jackson, Adams-Rite, Dor-O-Matic & Von Duprin), and glazed with 7/16’ laminated glass. Single doors are available up to 42” x 96” and pairs of doors are available up to 72” x 96” with our 3000, 3100 & 5000 Framing Systems. When designing or installing your Impact project, make sure you check our Product Approval for the correct sizes and design pressure required to meet the codes in your area. The system is available in Clear & Dark Bronze Anodized, Environmentally friendly Archkote Powder Coating and custom finishes. RESISTOR MEDIUM STILE DOOR LINE Air: ASTM E283: air shall not exceed SGL DR-.50 CFM when tested @ 6.24 PSF. PR DRS-1. 0 CFM when tested @ 6.24 PSF Structure: ASTM E330: Structural Forced Entry: Passed ASTM F842 Tested Per: TAS 201, TAS 202, TAS 203 Product Approvals: Miami-Dade - NOA 05-0829.08 FBC 6350.1 Details & Approval Information: Complete system details are available on the Arch Product CD or check our websites. 02/08 RESISTOR MEDIUM STILE DOOR LINE www.archaluminum.net www.hurricanecodes.com