*myarchiexpo

Form Tie Bars

Product catalog summary

Product Overview
The ArcelorMittal Form Tie Bar is a high-quality product designed for use in industrial formwork systems, lost anchoring solutions, and special connections for both cast-in-place and precast applications. It features a hot rolled, right flat deep thread bar for optimal self-cleaning after removal.

Certifications and Standards
ArcelorMittal Rodange is certified under ISO 9001 for Quality Assurance and ISO 14001 for Environmental Management. The company also adheres to the OHSAS 18001 standard for Health & Safety. The product is certified according to DIBt (registration number Z-12.5-114) and NFP 93-350 standards.

Product Specifications

Available in Ø15mm and Ø20mm diameters, with lengths of 6000mm or 12000mm.
Bundles of 100 bars for Ø15mm and 75 bars for Ø20mm.
Special lengths and bundling options available upon request.
Corrosion protection through electrogalvanizing available on request.

Technical Specifications

Diameter (mm)	15	20
Yield load min. [KN]	160	285
Rp0.2 min. [MPa]	900	900
Ultimate load min. [KN]	196	346
Rm min. [MPa]	1100	1100
Elongation Agt (%)	4	4
Elongation A10d (%)	7	7
KCV min. at -20°C [J]	28	28
Kg/m	1.41	2.51

Service and Support

Worldwide shipments with all administrative formalities handled.
Fast communication, flexibility, and reliability.
On-time delivery and quick, accurate document handling.

Contact Information
For further information, contact ArcelorMittal Commercial Bars & Rods at 66, rue de Luxembourg, L-4221 Esch-sur-Alzette, Grand-Duchy of Luxembourg. Phone: +352 5313 3747, Fax: +352 5313 45 4454, Email: [email protected], Website: www.ares.lu/2_formtiebar.htm

Catalog excerpts

Long Carbon Europe Bars & Rods

Open the catalog to page 1

The ArcelorMittal Form Tie Bar is a high quality product used in industrial formwork systems, lost anchoring solutions, special connections and applications for cast on place and precast. ArcelorMittal supplies a hot rolled, right flat deep thread bar, which assures the best effect for selfcleaning after removal. ArcelorMittal Rodange is certified according to ISO 9001 (Quality Assurance) and 14001 standards (Environmental Management). With a strong commitment towards Health & Safety, ArcelorMittal Rodange is following the OHSAS 18001 standard approved. Technical specification Grade 160, St 900/1100...

Open the catalog to page 2

All ARCELORMITTAL Long catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list