PRISMASOLAR
2Pages

Data sheet Prismasolar 04/2012 Glasfabrik Lamberts GmbH & Co.KG Postfach 5 60 95624 Wunsiedel-Holenbrunn Telefon: 09232-605-0 Telefax: 09232-605-33 Product Spezification PRISMASOLAR Quality definition: Prismasolar is a modern patterned glass in a vanguard design, generally produced in standard glass colour. The glass quality and its tolerances are exclusively defined by EN 572. The glass is cut during base-glass production, therefore the glass edges require further refinement by the processor. For bigger quantities the glass could also be produced as low-iron glass in a special production run (further information from our sales staff). (* B = nominal width / L = nominal Length / d = nominal thickness)  6 mm (d)*: 200 x 300 cm (packed in wooden crates, 22 sheets each) 186 x 330 cm (packed in wooden crates, 22 sheets each)  10 mm (d)*: 186 x 330 cm (packed in wooden crates, 12 sheets each) Direction of pattern 204 x 330 cm (packed in wooden crates, 12 sheets each)  Other dimensions or thickness: to be asked in time prior to writing a specification, sending an offer and/or placing an order. Cross-section (chart is not true to scale) Processing possibilities:  PRISMASOLAR can be toughened and laminated by processing companies with special state - of – the art machinery.  PRISMASOLAR, 6 mm and 8 mm can be laminated only.  PRISMASOLAR, 10 mm and 12 mm can be toughened and laminated. In case toughened glass is used in facades, Lamberts strongly recommends a heat-soak-test in accordance with relevant construction law and the German “Bauregelliste11.11”. Glasfabrik Lamberts reserves the right to change the herein mentioned values . This may be at any time and without prior warning! We point out that you are obliged to acquire information on the latest version from us prior to accepting your order and placing your order with us. All information given by Glasfabrik Lamberts is non-binding and is based on our General Terms and Conditions and technical ter

Data sheet Prismasolar 04/2012 Technical values: Lighttransmittance total solar energy transmittance General manifestations for the use of the glass: In this respect, it is a typical characteristic of patterned glass to feature optical deviations, especially regarding the surface appearance. In case that several glass pieces are used in a glass wall next to and/or above of each other, it must be considered that, due to the natural deviation of this linear pattern (which is also in accordance with EN 572), an homogenous appearance over the entire façade whether straight vertical or...