KYBSUN 2

KYBSUN 2

Product catalog summary
Introduction: This guide provides instructions for using the LYX/KYBSUN 2 solar captor, detailing its modes, installation, customization, and maintenance.
Operating Modes:
  • Mode 1: Activated by a short press (1 flash), it turns on automatically at dusk with 125 lumens and uses a presence detector to increase to 500 lumens for 30 seconds.
  • Mode 2: Activated by a second short press (2 flashes), it provides permanent lighting at 500 lumens, deactivating the presence detector.
  • Off: A third short press turns the device off.
Installation: If the solar module does not work initially, place it in the sun for a day or recharge via the provided USB cable. Lighting duration ranges from 5 to 200 hours depending on intensity.
Customization: Long press the button to adjust settings:
  • Mode 1: Standby setting from 0 to 300 lumens.
  • Mode 2: Adjustable light intensity from 5 to 500 lumens.
Usage Tips: Position the lamp in a sunny area, orient the detector towards passage areas, clean the solar panel regularly, and conserve charge during low light. Replace batteries if the lamp stops working after charging.
Battery Level Indicator:
  • Solar Charging: 3 rapid flashes indicate over 75% charge; optimal charging time is 8 hours.
  • USB Charging: Flashes indicate charge level: 1 flash (<25%), 2 flashes (25-75%), 3 flashes (up to 75%); charging time is 7 hours.
Technical Characteristics: The luminaire includes a removable solar block with a high-efficiency solar panel, two lithium batteries, 10 LEDs (3W, 3500K, 500 lumens), a presence detector, and an ON/OFF button.
Batteries: Lithium batteries have a lifespan of 3 to 5 years and should be recycled properly.
Warranty: The product is guaranteed for 2 years against manufacturing defects, excluding misuse, deterioration, submersion, and damage from falls.
Components: Includes an ON/OFF button, solar captor, presence detector, and USB wire connector.
See more

Catalog excerpts

KYBSUN 2-1

LYX / KYBSUN 2 solar captor SIMPLIFIED USER GUIDE MODE 1 / First short press on button (indicated by 1 * flashing): - Turns on automatically at dusk. (125 Lumens pre-programmed in standby) - Presence detector activated (lighting at 500 Lumens for 30 s) MODE 2 / Second short press on button (indicated by 2 * * flashes) : - Forced walk. Permanent lighting at 500 Lumens. (In this mode, presence detector deactivated.) OFF / Third short press on button (no blinking) SOLAR CAPTOR PRESENCE DETECTOR ON / OFF BUTTON To find a mode / follow the cycle (Mode1 / Mode 2 / Switch off) by successively pressing the button. AT THE INSTALLATION, IF YOUR SOLAR MODULE DOES NOT WORK Place it one day in the sun or recharge via the USB cable provided. Duration of lighting : from 5h to 200h according to the luminous intensity set. CUSTOMIZING SETTINGS by a long press on the button MODE 1 / Standby setting from 0 to 300 lumens MODE 2 / Adjustable permanent light intensity from 5 to 500 lumens USAGE TIPS Position your lamp in a preferably sunny space. Orient your lamp with the detector (white sphere) in the direction of the passage areas. Regularly clean the solar panel to optimize charging. In times of low light, conserve lamp charge by setting the standby position lower. If the lamp no longer works, after solar charging or USB port, consider replacing the batteries. Do not store the unloaded block for a long time ( several months ). It is advisable to recharge the block at least once a year. BATTERY LEVEL INDICATOR - SOLAR CHARGING Charge indicator : 3 * * * rapid flashes on the LEDs = Battery charge greater than 75% Charging time 8 hours in optimal conditions. - USB CHARGING Charge indicator : the block indicates its battery level every ten seconds via low rapid flashes on the LEDs : 1 * flash : Battery charge less than 25% 2 * * flashes : Battery charge between 25% and 75% 3 * * * flashes : battery charge up to 75% Charging time 7 hours. - TECHNICAL CHARACTERISTICS Your solar luminaire is equipped with an autonomous, removable solar block, combining a high-efficiency solar panel, two lithium batteries, 10 high-efficiency LEDs (power 3W - 3500 K) with a light output of 500 lumens, a presence detector (side white sensor) and an ON/OFF button (side black button) allowing you to choose directly the desired operating mode (2 modes to choose from). - DISCLAIMER OF WARRANTY : The warranty excludes all misuse and deterioration. The warranty does not apply if the block has been submerged. If the block was purchased more than two years ago. If a fall has caused visible damage (a crack or a strong scratch) or invisible (electronic damage) altering the usual operation of the solar block. - WARRANTY This product is guaranteed for 2 YEARS against all manufacturing defects. The manufacturing code printed on the box must be preserved to benefit from the guarantee. - INTERCHANGEABLE LITHIUM BATTERIES Lifespan of 3 to 5 years. Remember to recycle your batteries by bringing them at dedicated collection points. Do not throw

 Open the catalog to page 1

All Aralia - LYX luminaires catalogs and technical brochures

  1. KYBSUN 3

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About ArchiExpo
ArchiExpo is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. ArchiExpo is an entity of VirtualExpo Group.