Orion enclosure
8Pages

Orion 160 Freedom from railings Pool enclosures are essential for the uninterrupted use of outdoor swimming pools. It is well known that in order to maintain water quality, have year-round use of the pool and to safeguard children against the dangers of water, only an enclosed structure will suffice. Traditionally, telescopically moved enclosures require railings to be installed in order to achieve the best durability. Aquacomet’s ORION models eliminate the need for these disturbing railings. Aquacomet’s new development is the ORION enclosure, which provides telescopic opening and closing...

Remote operation Safe operation The structure of the ORION models provide the opportunity to open and close the enclosure remotely. The low-voltage friction-drive motor unit is mounted on the largest part of the enclosure. The battery is hidden inside the arch, does not require care and is charged by a solar power panel mounted on top of the enclosure. Two synchronized motor units control the opening and closing and are placed opposite one another. The motors can be controlled away from the operating unit so potential surface problems can be handled easily.

ORION 160 enclosures can be ordered in the standard colors of white and anthracite. Both colors have natureloxal colored parts, which lend an even more dynamic appearance to the structure. The slightly curved roof structure is glazed with 10 mm polycarbonate plate while the vertical side walls and wall endings are glazed with either a clear 4 mm SAN or a polycarbonate plate.

One problem – many solutions Aquacomet offers the ORION 100 to their customers as an enclosure without railings to the maximum span of 6 m. The structural components are identical to that of the ORION 160 except for the transverse support ribs. They have a cross section of 100 mm which has significantly better durability than the durability which can be expected from conventional enclosures with railings. The ORION 100 model can be ordered in the shorter version - which is presented in the picture - or in the taller version which was introduced with the ORION 160. The lower built solutions...

Professional technology – safe operation Aquacomet’s ORION enclosures are technically mature solutions which meet every user requirement in an aesthetic way. ORION type enclosures are tested and approved according to the French AFNOR NF P 90-309 technical guidelines and standards, and are therefore safe and user friendly. Aquacomet’s ORION enclosures are produced using the best quality components and are made by professional staff. We highly recommend ORION enclosures as top-quality pool enclosures.

YOUR PARTNER: Published with the support of HITA. TRADE AGENCY Pictures are illustrations. Copying of whole or parts is not permitted. With the reservation of technical changes. For any misprint in the above we are not responsible