Technical Information FPC-A32 Solar Collector Product Name: FPC-A32 Flat Plate Collector Part Code: FPC-A32 Applications The Apricus FPC-A32 at plate collector is suitable for residential or commercial domestic hot water projects. A key feature is the light weight due to use of ultra-light melamine foam insulation. Features High efciency Tinox energy AL solar absorber Ultra lightweight melamine foam insulation High tensile grade 6063-T5 black anodized aluminium body High transparency solar glass Harp style riser arrangement compatible with direct, closed and drain-back systems. • Suitable for portrait or landscape orientation • • • • • Collector Performance Curve Delta-T (tm-ta) oF 0.4mm TINOX solar AL ∅19.1mm OD x 1mm thick ∅10mm OD x 0.7mm thick 130mm (total of 9 risers) G3/4” M thread (plus other options) 3.2mm, 92% Transmittance HTV Silicone Rubber 6063 Black Anodized Aluminium 0.8mm 5052-H16 Aluminium Flow rate (US gallons/min) Pressure Drop (feet head) Pressure Drop Pressure Drop (m head) Delta-T (tm-ta) Physical Specications * Data from TUV test report 154010288, 1000W/m2, based on aperture area. Aperture Area: Gross Area: Gross Dry Weight: Fluid Capacity: Max Pressure: Performance Data Peak Power Output: Eta0: a1 (W/m2K): a2 (W/m2K2): Nominal Flow Rate: Max Flow Rate: Absorber: Header: Risers: Riser spacing: Connection: Glass: Rubber Seals: Collector Body: Back Sheet: Flow rate (L/min) Sustainable HOT WATER Solutions, Delivered by APRICUS Apricus Solar Co., Ltd [email protected] www.apricus.com © 2013 - Apricus Solar Co., Ltd