UC206W
2Pages

Uniline Series UC206W Line Array Compact Speaker - Wide coverage Three acoustic ways 2 x 6,5" Neodymium Low/Mid cone drivers (w/1.5" voice coil) 5" MF + 0.5" HF Neodymium, coaxial drivers Features Very compact wide coverage modular line array enclosure Constant horizontal directivity of 105° Integrated, intuitive and quick rigging system Applications Short to medium throw sound reinforcement Front fill and Downfill speaker for UL206N line array Full range line array for vocal and background music Distributed FOH or immersive sound system System Specifications 65 Hz - 19 kHz (wide band mode) Lo/Mid : 300 W AES Mid/Hi : 80 W AES Max peak SPL@1m : 126 dB Dimensions : 8,3"x21,3"x14,2" (210x540x360 mm) Bi-amplified operation APG digital processing mandatory LF reinforcement with optional UC115B VLF reinforcement with 18" subs (optional) The UC206W Uniline Compact line array incorporates 3-way acoustic design. The Lo/Mid section is fitted with two 6.5" cone drivers loaded in compression and optimized for low frequency reproduction. Mid/Hi coherency comes from coaxial device fitted with 5" / HF 0.5" Neodymium drivers loaded by an Isotop15™ waveguide. This Isotop™ load employs an active annular horn and iso-phase plug to achieve acoustic impedance adaptation and performance comparable to traditional compression drivers, but with greatly increased bandwidth and power handling. Twin 6.5" loudspeakers serve Lo/Mid bandwidth between 80 Hz and 450 Hz. The mid-range 5" speaker displays ultra-low distortion and extends from 450 Hz to 5KHz. The 0.5" HF driver operates smoothly from 5 KHz to 19 KHz. Directivity control, compression, transducer phase alignment and protection are all established through the UC206’s advanced acoustic horn. The mechanical system is totally captive and allows use of Uniline Compact either rigged or stacked. UC115B enclosure is the optional dedicated low frequency enclosure that offers specific ergonomics for cardioids LF pattern control and rigging. APG subwoofers allow infra bass extension. Use of an APG digital processor is required. The Uniline Compact is a modular line array system composed of 3 elements: UC206N, UC206W and UC115B. Thanks to its acoustic and mechanical modularity, it can cover an extended field of applications, coverage and throw. The APG Uniline Compact UC206W line array element specifically offers a wide horizontal coverage and constant directivity across the whole spectrum. Fast and accurate inter-enclosure rigging system provides one-degree steps angle adjustment from 0° to 15°. UC206W can be integrated as a main stereo FOH system for wide areas, providing extended stereo imaging thru the audience. It can also be used as a frontfill speaker or a downfill with a main UC206N/UC115B cluster, distributed sound system like central cluster with Uniline, front fills, out fills and support delay lines, and it also integrates very well in an immersive sound design. UC206W and UC206N share the same technologies and components; the only difference is the shape of the front horn and the resulting horizontal dispersion. Uniline Compact modular line array is a versatile solution for a wide range of applications, indoor or outdoor, from vocal PA, sports, corporate, theatre to live music events. It provides high dynamic and sonic performance in a very compact, lightweight and visually discreet format, easy to use professional tool thanks to its advanced ergonomics.

Features Frequency response, 2 way (1) Frequency response, 3 way (1) Frequency response, 4 way (1) Efficiency 1W @ 1m Max level @ 1m Peak level dB SPL @ 1m Directivity, angles to -6 dB (2) Nominal Impedance 126 dB SPL 105 °H (constant F>450 Hz) 105°H (constant) x 15°V (average) 16 Ohm 16 Ohm Enclosure Components Transducers Coil diameters of Type of load Bass Reflex IsotopTM and constant directivity horn Power Requirements Recommended amplifiers (3) 200 a 600 W 60 a 160 W Construction and characteristics Cabinet 12 mm plywood birch Coating Black, aquarethane, impact-resistant finish Front...