iS115_APG_EN TECHNICAL SHEET
2Pages

Compact Subwoofer 1 x 15" Neodyme (3" voice coil) Bass Reflex Features Minimum height and width Accuracy in low frequency reproduction Sonic impact and precision Applications Very compact mobile system Unobtrusive in fixed installations Stage monitoring drum fill The iS115 is an extremely compact and efficient subwoofer for either fixed installations or mobile applications. It features a single 15" neodymium cone driver. This exclusive design significantly reduces the volume of the acoustic load in order to obtain the best size / low cutoff frequency ratio as well as a significant efficiency gain in terms of useable bandwidth and perfect membrane movement control. This driver takes advantage of a forced thermal cooling, which drastically reduces thermal compression, resulting in high sound pressure capacity. In terms of ergonomics, the iS115 features two integrated handles, recessed input connectors, a pole-mount point and protective skids. The iS115 should be exclusively used with APG processors and amplifiers for which they are recommended. The iS115 is designed for low frequency reinforcement of small to medium power sound systems where space is at a premium. The total efficiency gain resulting from both the acoustic load and the forced venting technology is about 3dB of sound pressure. The iS115 is therefore an ideal choice for applications where maximum power in the low frequencies is required from a minimum amount of space. In fixed installations, iS115’s reduced dimensions enable unobtrusive installation in restricted environments, such as under seats or on a small stage, or flown from the ceiling. They are ideal for theatres, conference room or multi-media applications or indeed as part of a compact, efficient FOH system in bars, small clubs or mobile sound systems. These subwoofers are also perfect for distributed sound in large scale installations. The slots in the top of the enclosure allow the physical coupling with DX12 and DX15 speakers to form compact and discreet drum fill systems on stage. The iS115’s offers low frequency from 40Hz for maximum precision even in difficult acoustic environme

Technical Specifications 23,5" Features iS115 Description Bandwidth (± 10 dB) SPL max @1m Nominal directivity (H° x V°) Nominal impedance Compact subwoofer 42 Hz - 120 Hz 138 dB SPL (1) Omnidirectionnal (2) 8 ohm (1) Peak level @ 1m AES2-2012 2πsr using 12dB crest factor pink noise with APG preset (2) Nominal directivity @-6dB (3) Continuous power according to AES2-2012 in DCR (4) Peak power according to AES2-2012 in DCR (5) SPEAKON connectors are wired hot pin 1+, cold pin1- (2+ and 2- THRU) Components Transducers 1 x 15" Neodyme Topology Type of load Bass Reflex Way and amplification...