iS112_APG_EN TECHNICAL SHEET
2Pages

{{requestButtons}}

Catalog excerpts

iS112_APG_EN TECHNICAL SHEET - 1

Compact Subwoofer 1 x 12" Neodyme (3" voice coil) Bass Reflex Features Compact size Accuracy in low frequency reproduction Sonic impact Applications Very compact mobile systems Unobtrusive in fixed installations The iS112 is an extremely compact and efficient subwoofer for either fixed installations or mobile applications. It features a single 12" cone driver loaded in bass reflex This exclusive design significantly reduces the volume of the acoustic load in order to obtain the best size / low cutoff frequency ratio as well as a significant efficiency gain in terms of useable bandwidth and perfect membrane movement control. This driver takes advantage of a forced thermal cooling, which drastically reduces thermal compression, resulting in high sound pressure capacity. In terms of ergonomics, the iS112 features, a pole-mount point, recessed connectors and protective skids. The iS112 must be used with APG processors and amplifiers. The iS112 is designed for low frequency reinforcement of small to medium power sound systems where compactness and discretion is at a premium. In fixed installations, iS112’s reduced dimensions enable unobtrusive installation in restricted environments, such as under seats or on a small stage, or flown from the ceiling. The iS112 offers low frequency from 45 Hz for maximum precision even in difficult acoustic environments. The iS112 can be combined with iX and DX series speakers to form compact, portable FOH systems for corporate events, A/V applications, low and medium power music reproduction. It is ideal for small venues, conference or indeed as part of a compact, efficient FOH system in bars, small clubs or mobile sound systems. This subwoofer is perfectly suitable for distributed sound in large scale installations. The sonic impact and precision make it efficient for « drum fill » application on small stag

Open the catalog to page 1
iS112_APG_EN TECHNICAL SHEET - 2

Technical Specifications 20,6" Features iS112 Description Usable bandwith (± 10 dB) SPL max @1m Nominal directivity (H° x V°) Nominal impedance Compact subwoofer 45 Hz - 150 Hz 137 dB SPL (1) Omnidirectionnal (2) 8 ohm (1) Peak level @ 1m AES2-2012 2πsr using 12dB crest factor pink noise with APG preset (2) Nominal directivity @-6dB (3) Continuous power according to AES2-2012 in DCR (4) Peak power according to AES2-2012 in DCR (5) SPEAKON connectors are wired hot pin 1+, cold pin1- (2+ and 2- THRU) Components Transducers 1 x 12" Neodyme Topology Type of load Bass Reflex Way and...

Open the catalog to page 2

All APG catalogs and technical brochures

  1. UC115B

    2 Pages

  2. UC206W

    2 Pages

  3. UL118B

    2 Pages

  4. UL210D

    2 Pages

  5. SA20:2

    2 Pages

  6. DA15:4

    2 Pages

  7. DA50:4

    2 Pages

  8. SMX 15

    2 Pages

  9. UL210

    2 Pages