Exhibit with us
*myarchiexpo  
English
  1. Catalogs
  2. AO SMITH
  3. BTL
cad

BTL

BTL
1 / 4 PagesView full catalog

BTL

Product catalog summary
Overview: The BTL 85/100 is an atmospheric water heater designed for light commercial and industrial applications. It features a replaceable magnesium anode, control thermostats, a safety sensor, and a stainless-steel burner suitable for natural or LP gas. It meets low NOx emission standards.
Technical Specifications:
  • Gas Data: For natural gas, the input is 22.1 kW (BTL 85) and 21.0 kW (BTL 100), with outputs of 16.8 kW and 16.6 kW respectively. NOx emissions are 22 mg/kWh for BTL 85 and 30 mg/kWh for BTL 100.
  • Efficiency: Gross efficiency is 76% for BTL 85 and 79% for BTL 100.
  • Capacity: Storage capacities are 268 liters for BTL 85 and 358 liters for BTL 100.
  • Draw-off Capacity: At a temperature difference of 44°C, BTL 85 can deliver 450 liters in 30 minutes, while BTL 100 can deliver 550 liters.
Ecodesign Specifications:
  • Energy Labeling: BTL 85 is rated B, and BTL 100 is rated C.
  • Efficiency: Both models have an efficiency of 58% under standard load profiles.
Installation and Maintenance: The heater must be installed on a non-flammable surface and in accordance with local standards. Detailed installation and maintenance instructions are provided in the manual.
Dimensions: The BTL 85 has a height of 1595 mm, while the BTL 100 is 1780 mm tall. Both models have specific dimensions for connections and require consideration of the flue gas outlet pipe.
See more

Catalog excerpts

BTL-1

BTL Nitrol Light Commercial Atmospheric Water Heater BTL 85/100 • Atmospheric water heater, primarily intended for light commercial/industrial applications • Replaceable magnesium anode • Control, high limit and energy cut-off thermostats to ensure safe operation • Safety sensor to prevent flue spillage • Waterway access cover for comprehensive waterside tank maintenance • Low NOx < 56mg/Kwh, meets tightened emission and efficiency requirements 26/09/18 Stainless-steel burner for natural or LP gas

 Open the catalog to page 1
BTL-2

Gas data on gross value

 Open the catalog to page 2
BTL-4

Cold water supply Hot water outlet Circulation pipe Gas supply 1 Pressure reducing valve A 10 Gas valve 11 Service valve 14 Hot water tap 15 Expansion valve A BTL water heater should be installed in accordance with local standards and ventilation requirements (category B11BS). This appliance must be installed on a non-flammable floor or surface. In the instruction manual you will find all the necessary information regarding connection, installation and maintenance of the product. Information regarding the recycling or disposal of the product can also be found in the manual. This manual is delivered...

 Open the catalog to page 4

All AO SMITH catalogs and technical brochures

  1. Product Catalogue
    Product Catalogue

    94  Pages

  2. The energy to meet your needs
    The energy to meet your needs

    96  Pages

  3. Product catalogue
    Product catalogue

    116  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.