video corpo

panta rei_14

panta rei_14
1 / 393 PagesView full catalog

panta rei_14

Product catalog summary

Overview

This document provides a comprehensive technical guide for the PANTA REI_14 bathroom furniture collection designed by Carlo Colombo. It covers product specifications, modular configurations, ordering instructions, material details, assembly notes, and energy information.

1. Product Specifications and Components

  • Detailed dimensions and article codes are provided for various furniture items including sinks, drawers (wood and slim versions), cabinets, panels, shelves, and decorative elements.
  • Dimensions are given in centimeters, specifying length (L), depth (P), height (H), and diameter (Ø) where applicable.
  • Components include modular units such as ICE6 (72x14x25 cm), FLASH90L (72x90 cm), ARENA172 (216x54x1.4 cm), and drawers PA5072/PA5272 (72x54x50 cm).
  • Drawers come in two heights: 9 cm and 18 cm, with some internal stainless steel accessories incompatible with slim and wood drawer types.

2. Configurations and Ordering Instructions

  • Furniture modules are designed for modular assembly with standard heights of 37.5 cm and 50 cm, and widths ranging from 36 cm to 216 cm.
  • Seven solution types (A to G) accommodate different sink types (wall-mounted, free-standing) and living space requirements.
  • Ordering requires specifying the solution letter, component sizes, and version (e.g., right or left).
  • All furniture is factory pre-assembled and delivered ready for installation, facilitating ease of assembly.

3. Material and Coating System: COLDSTONE

  • COLDSTONE is an eco-friendly, mono-component wood coating system applied in seven layers, free from cement, lime, and epoxy resins.
  • Key properties include breathability, non-yellowing, excellent flexibility, dirt resistance, non-flammability, and non-toxicity.
  • It complies with European VOC emission directives (2004/42/CE) and indoor air quality standards (CEE 89/106).
  • Materials are registered with the Italian National Health Institute and produced under workplace safety regulations.

4. Additional Product Details and Accessories

  • Accessories include LED lamps (with noted surcharges), single lever mixers (AY301SA/AY301LU), touch LED lighting, and special drawers (e.g., SLIM with surcharge).
  • Integrated sinks and tops feature pre-drilled holes for fittings.
  • Various shelving, cabinetry, and decorative units are detailed with modular dimensions and configurations.

5. Assembly and Installation Notes

  • Special attention is required for band edge measurements (21.5 cm plus 3 mm) to ensure proper coverage and avoid exposing the band bottom on the first cover.
  • Configurations support modular assembly and flexibility for different living spaces.
  • Custom measurements and special versions are available upon request.

6. Product Components and Dimensions

  • Components include panels, fronts, plinths (lacquered embossed black), internal drawers, wall and high cabinets, and open cabinets with glass or wood finishes.
  • Dimensions are modular and combinable, with lengths often expressed as sums of standard modules (e.g., 72 = 36+36 cm).
  • Heights standardized at 25, 37.5, and 50 cm; depths typically 40 or 54 cm.
  • Compatibility notes highlight that some internal stainless steel drawers are not compatible with SLIM and WOOD drawer types.

7. Materials and Finishes

  • Wood components are lacquered in matte or glossy finishes.
  • Glass components are extra-clear with thicknesses of 8 or 16 mm, available in lacquered or acid-etched lacquered finishes.
  • Colour palettes include greys, earth tones, vibrant colours, and various oak and walnut wood essences with different treatments.

8. Design and Production Notes

  • Antonio Lupi Design S.p.A. reserves the right to modify aesthetic, technical, dimensional, and colour aspects without prior notice.
  • Production may be suspended at any time without liability.
  • The company disclaims responsibility for inaccuracies due to printing or transcription errors.
  • All products are designed and manufactured entirely in Italy.

9. Energy Information

  • Products come with energy efficiency classifications ranging from C to A++.
  • Some items feature integrated LED lamps of energy class A that are non-replaceable.
  • Compatibility notes specify which bulb energy classes are suitable for each product to ensure compliance with energy standards.

Key Takeaways and Best Practices

  • Verify article codes and dimensions carefully before ordering or assembly.
  • Account for special features such as holes (FORO C/B) and LED lighting surcharges in planning and budgeting.
  • Group components according to numbered sets to maintain assembly integrity.
  • Confirm compatibility of internal drawers and accessories with cabinet types.
  • Utilize modular dimensions for flexible configurations tailored to specific bathroom or living space designs.
  • Follow assembly notes precisely to avoid installation issues, especially regarding band edge measurements.

Summary

This technical document serves as a detailed catalog and assembly guide for the PANTA REI_14 bathroom furniture collection. It emphasizes modularity, environmental compliance through the COLDSTONE coating system, and customization options. The inclusion of precise dimensions, material specifications, and energy classifications supports informed selection, ordering, and installation processes for architects, designers, and installers.

See more

Catalog excerpts

panta rei_14-1

bagnarsi ad arte_bathing with art

 Open the catalog to page 1
panta rei_14-5

design Carlo Colombo

 Open the catalog to page 5
panta rei_14-11

PANTA REI_XL art. MANTRA150 L 54 x P 15,5 x H 50 cm maggiorazione lampada a LED / surcharge for LED light

 Open the catalog to page 11
panta rei_14-15

PANTA REI_XL A Cassetto in legno art. WOOD H 9 cm. Wood drawer art. WOOD H 9 cm. B Cassetto in legno art. WOOD H 18 cm. Wood drawer art. WOOD H 18 cm. 13

 Open the catalog to page 15
panta rei_14-17

PANTA REI_XL A Cassetto art. SLIM H 9 cm. Drawer art. SLIM H 9 cm. B Cassetto art. SLIM H 18 cm. Drawer art. SLIM H 18 cm. 15

 Open the catalog to page 17
panta rei_14-18

PANTA REI_XL In fase di ordine indicare il tipo di composizione scegliendo la lettera di riferimento (A, B,C,D,E,F,G), le misure dei componenti e la versione desiderata. Il mobile verrà composto in azienda e arriverà al cliente già montato come da soluzione scelta. Di seguito troverete un esempio esplicativo di come ordinare un mobile appartenente alla soluzione D. Le soluzioni A e B possono essere utilizzate con lavabi a parete, con lavabi da terra, oppure possono essere inseriti singolarmente in spazi living. Specify at time of order the type of configuration among the proposed solutions A,B,C,D,E,F,G...

 Open the catalog to page 18
panta rei_14-19

PANTA REI_XL SOLUZIONI CON PORTALAVABO - CONFIGURATIONS WITH SINK UNITS H 37,5 - 50 C Base con 1 cassetto e 1 vano a giorno Cabinet with 1 drawer and 1open compartment Portalavabo con 1 cassetto Sink unit with 1 drawer MAX 216 VERSIONE DX - Right version D Base con 1 cassetto e 1 vano a giorno Cabinet with 1 drawer and 1open compartment Base con 1 cassetto e 1 vano a giorno Cabinet with 1 drawer and 1open compartment Portalavabo con 1 cassetto Sink unit with 1 drawer MAX 216 VERSIONE DX - Right version E Base con 1 cassetto e 1 vano a giorno Cabinet with 1 drawer and 1open compartment Portalavabo...

 Open the catalog to page 19
panta rei_14-23

art. RG36 L 36 x P 54 x H 50 cm Misura speciale / Special measurement

 Open the catalog to page 23
panta rei_14-29

art. PA28180 L 180 x P 54 x H 50 cm + FORO C maggiorazione cassetto Art. SLIM / surcharge for Art. SLIM drawer

 Open the catalog to page 29
panta rei_14-44

art. PIEGAXS L 216 x P 54 x H 6 cm maggiorazione per raccordo e carter sifone / surcharge for drain pipe fitting and siphon maggiorazione cassetto Art. SLIM / surcharge for Art. SLIM drawer

 Open the catalog to page 44
panta rei_14-83

versione speciale / special version

 Open the catalog to page 83
panta rei_14-110

È un sistema di rivestimento del legno con ecomalte mono-componenti applicate con sette mani di spatolatura. Si tratta di un rivestimento protettivo che non contiene cemento, calce e resine epossidiche. Traspirante, non ingiallente, ha un’ottima flessibilità. Anche se non necessario poiché si tratta di prodotti non pericolosi, tutti i materiali del ciclo di rivestimento sono stati comunicati e codificati all’Istituto Superiore di Sanità. - Conforme alla Direttiva 2004/42/CE relativa ai (VOC). - Conforme alla Direttiva CEE 89/106 (IAQ): Qualità dell’aria all’interno degli ambienti. - Non sviluppa...

 Open the catalog to page 110
panta rei_14-121

art. PE463 L 72 x P 14 x H 50 cm Misura speciale / Special measurement

 Open the catalog to page 121
panta rei_14-150

art. SEGRETO L 180 x P 32 x H 50 cm maggiorazione lampada a LED / surcharge for LED light

 Open the catalog to page 150
panta rei_14-181

art. TENDERSG L 72 x P 41 x H 85 cm Stone Grey

 Open the catalog to page 181
panta rei_14-229

1 art. FLASH75N L 180 x H 75 cm 2 art. TOUCH LED 3 art. TAPE54 L 54 x P 8 x H 5 cm art. TAPE13 L 27 x P 8 cm art. TAPE101 art. TAPE102 4 art. SEGNOXL L 180 x P 54 x H 12,5 cm 5 art. MICRO 6 art. PB4180 L 180 x P 54 x H 25 cm

 Open the catalog to page 229
panta rei_14-317

10 art. 03990COMBI sx L 240 x P 90 x H 3,9 cm misura speciale / special measurement

 Open the catalog to page 317
panta rei_14-374

Schienale opzionale per mobili ad isola. Optional back for freestanding furniture. Zoccolo smussato laccato nero goffrato. Bevelled plinth laquered embossed black. Zoccolo smussato laccato nero goffrato per mobili ad isola. Bevelled plinth laquered embossed black for freestanding furniture. 372

 Open the catalog to page 374
panta rei_14-375

Cassetto interno opzionale solo per mobili H 50. Optional internal drawer only for cabinets 50 cm H.

 Open the catalog to page 375
panta rei_14-376

Cassetto interno opzionale solo per mobili H 37,5, H 50 e colonna con cassetto. Optional internal drawer only for forniture 37,5 H 50 H and high cabinets with drawer. Attrezzatura interna per cassetti in acciaio inox con 2 divisori, non compatibile con cassetti Art. SLIM e Art. WOOD. Satin stainless steel internal drawer accessories with 2 dividers, not compatible with Art. SLIM and Art. WOOD drawers.

 Open the catalog to page 376
panta rei_14-377

Attrezzatura interna per cassetti in acciaio inox con 1 divisorio e 2 vaschette, non compatibile con cassetti Art. SLIM e Art. WOOD. Satin stainless steel internal drawer accessories with 1 divider and 2 trays, not compatible with Art. SLIM and Art. WOOD drawers. Attrezzatura interna per cassetti in acciaio inox con 2 divisori, non compatibile con cassetti Art. SLIM e Art. WOOD. Satin stainless steel internal drawer accessories with 2 dividers, not compatible with Art. SLIM and Art. WOOD drawers. Attrezzatura interna per cassetti in acciaio inox con 2 divisori e 2 vaschette, non compatibile con...

 Open the catalog to page 377
panta rei_14-378

COMPONENTI - COMPONENTS

 Open the catalog to page 378
panta rei_14-379

COMPONENTI - COMPONENTS

 Open the catalog to page 379
panta rei_14-380

COMPONENTI - COMPONENTS

 Open the catalog to page 380
panta rei_14-381

COLONNE - HIGH CABINETS Colonna dx o sx con 1 anta e 3 ripiani interni. Right or left single door high cabinet with 3 inner shelves. PENSILI - WALL CABINETS Colonna dx o sx con 1 anta e 4 ripiani interni. Right or left single door high cabinet with 4 inner shelves. Colonna dx o sx con 1 anta, 2 ripiani interni e 1 cassetto. Right or left single door high cabinet, 2 internal shelves and 1 drawer. Colonna dx o sx con 2 ante e 3 ripiani interni. Right or left double door high cabinet with 3 internal shelves. Pensile dx o sx con 1 anta e 2 ripiani interni. Right or left single door wall cabinet with...

 Open the catalog to page 381
panta rei_14-382

Pensile a giorno a 1 vano. Open wall cabinet with 1 compartment. Pensile a giorno a 2 vani. Open wall cabinet with 2 compartments. Pensile a giorno a 2 vani. Open wall cabinet with 2 compartments. Pensile a giorno a 4 vani. Open wall cabinet with 4 compartments. PENSILI IN LEGNO - WOOD WALL CABINETS Pensile a giorno in cristallo extrachiaro a 1 vano con schienale in acciaio verniciato. Open wall cabinet in extra-clear glass with 1 compartment and back in painted steel. Colonna a giorno in cristallo extrachiaro a 4 vani con schienale in acciaio verniciato. Open high cabinet in extra-clear glass...

 Open the catalog to page 382

All ANTONIO LUPI catalogs and technical brochures

  1. fonte_catalog

    3  Pages

  2. borghi_catalog

    10  Pages

  3. TAPS

    102  Pages

  4. COLLAGE

    30  Pages

  5. CRISTALMOOD

    41  Pages

  6. NEWS _020

    212  Pages

  7. azimut

    4  Pages

  8. Bikappa taps

    29  Pages

  9. company profile

    44  Pages

  10. IGIGANTI

    44  Pages

  11. collezioni_017

    620  Pages

  12. NEWS SUMMER 017

    132  Pages

  13. AYATI

    51  Pages

  14. vascabarca

    36  Pages

  15. preview 016

    151  Pages

  16. PROGETTI 016

    92  Pages

  17. Blokko

    4  Pages

  18. Battigia

    1  Page

  19. Barrel

    4  Pages

  20. AL top

    105  Pages

  21. pocket 2015

    612  Pages

  22. fireplace 2015

    136  Pages

  23. contract

    5  Pages

  24. planeta_13

    194  Pages

  25. piana_13

    197  Pages

  26. sesamo

    21  Pages

  27. materia

    149  Pages

Archived catalogs

  1. BIT

    33  Pages

  2. PLANETA

    194  Pages

  3. pocket 13

    485  Pages

  4. pocket news_14

    69  Pages

  5. fireplace 2011

    73  Pages

  6. piana collection

    125  Pages

  7. Panta Rei

    120  Pages

  8. Vascabarca

    43  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.