cad

Punta PMR

Punta PMR

Punta PMR

Product catalog summary
Specifications:
The Punta PMR recessed luminaires utilize LED technology and are designed for tool-less ceiling mounting. They are not suitable for floor or wall mounting. The luminaires offer 360° turning and 65° tilting capabilities and come with an integral reflector available in SSP, SP, MFL, FL, or WFL options. A supply unit is included, and connection to the power supply is facilitated by a Wieland plug GST18i3 with a wire length of 0.5 m. DALI or INspire lighting control systems are available upon request, although INspire is not suitable for metal ceilings. The luminaires are available in white and anthracite colors.
Power Levels and Photometric Data:
The luminaires are available in power levels of 26W, 30W, 34W, and 40W. The photometric data includes various parameters such as CRI, light color, luminous flux, and system efficiency. The luminous flux and system efficiency vary depending on the power level and reflector type. The maximum connected load is 40W, and the values are subject to a deviation of up to 10% according to IEC 6722-1 standards.
Photometric Information:
The document provides detailed photometric information for different reflector types (FL, SP, WFL, MFL, SSP) including beam angles (FWHM and FWTM), intensity (I(0)), and illuminance (E(0)) at various heights. The data is presented in terms of luminous intensity distribution and beam spread.
Additional Information:
The luminaires operate at a voltage of 220-240 V, 50/60 Hz, with an optional range of 110-277 V. They weigh approximately 0.98 kg and have a color tolerance of 3SDCM (MacAdam). The maintenance of luminous flux is rated at L80/B10 for 50,000 hours at 25°C, with a failure rate of C0/B10 for the same duration and temperature. The luminaires are classified under photobiological safety RG1, have a protection class of 1, and an IP20 type of protection. Certification is in preparation, and the product comes with a 5-year warranty as per the conditions on the manufacturer's website.
See more

Catalog excerpts

Punta PMR-1

Recessed Luminaires Punta PMR — Lighting technology LED — Tool-less ceiling mounting — Floor and wall mounting not permitted — Turning and tilting (360°/65°) — With integral reflector SSP, SP, MFL, FL or WFL — Supply unit included — Connection to power supply by Wieland plug GST18i3; wire length l = 0.5 m — DALI or INspire lighting control system on request (INspire lighting control not for use in metal ceilings) — Colours: white, anthracite Maximum possible, optionally available connected load: 40 W. According to IEC 6722-1 the given rated values of the total luminous flux and of the electric power must not deviate by more than 10 %. The values apply to the luminaire with MFL reflector, in the case of the SSP/SP/FL/WFL reflectors the values can deviate +/- 5 %. The photometric values are standard values and refer to the entire luminaire. This is an example of a system design. There are further possible ways to equip the luminaire - for these optional versions please contact [email protected].

 Open the catalog to page 1
Punta PMR-2

© Ansorg GmbH Errows and subject to technical alterations! Unless otherwise stated, the dimensions are in m For LDT files and 3D data see www.ansorg.com 5 year warranty according to warranty conditions at www.ansorg.com/warranty

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.