Shot-firing! Knock it on the head with the new HAMMER-ON Fixing Part of Ancon’s innovative Non-Drill fixing range Solutions for all masonry to steel column applications

Ancon’s range of ‘NON-DRILL’ masonry-to-steel fixing solutions was developed to address the safety concerns of the Industry. IHR-H Head Restraint Ancon NON-DRILL fixings: • Eliminate the dangers associated with shot-firing and drilling • Quick, simple and economical to install • No power tools required • No special skills or equipment required • Fixings either abut the column or attach to the flange Hammer-On Fixing Available in five sizes to accommodate a steel thickness from 7mm to 25mm, this fixing is simply hammered onto the flange. It can be utilised either on a column with a tie or on a...

Other Non-Drill Fixings Internal Column Tie Available in seven sizes, this tie fits between the flanges of a column and should be installed at 225mm vertical centres. Non-Standard Internal Column Tie Special internal column ties can be designed to suit applications where the masonry does not sit inside the flanges of a column. The drawing provides some guidance on dimensions; contact Ancon for more information. New Briclok The Briclok fits to a column flange and can be used either across a cavity or back into the inner leaf. It should be positioned with the appropriate notch around the flange...

Ancon Building Products President Way, President Park Sheffield S4 7UR United Kingdom Tel: +44 (0) 114 275 5224 Fax: +44 (0) 114 276 8543 Email: [email protected] Visit: www.ancon.co.uk Ancon (Schweiz) AG Gewerbezone Widalmi 10 3216 Ried bei Kerzers Switzerland Tel: +41 (0) 31 750 3030 Fax: +41 (0) 31 750 3033 Email: [email protected] Visit: www.ancon.ch Ancon (Middle East) FZE PO Box 17225 Jebel Ali Dubai United Arab Emirates Tel: +971 (0) 4 883 4346 Fax: +971 (0) 4 883 4347 Email: [email protected] Ancon Building Products 114 Kurrajong Avenue Mount Druitt Sydney NSW 2770 Australia Tel: +61...

Hammer-On Tie and Head Restraint - Design Sheet FAO::Sales Department To enable Ancon to supply the most appropriate fixing for your application please complete the necessary details below and fax back to +44 (0) 114 276 8543. 1. Hammer-On Column Tie Components Example Application in Plan View Width of Section Block Width Flange Thickness Performance data: Ancon Hammer-On ties have an individual declared shear capacity of 2.7kN; when fixed at 225mm vertical centres, staggered on alternate sides of the column flange (effective centres 450mm on each side) the shear capacity per metre will be 6kN...

Internal Column Ties - Design Sheet FAO::Sales Department To enable Ancon to supply the most appropriate fixing for your application please complete the necessary details below and fax back to +44 (0) 114 276 8543. 1. Internal Column Tie Used when blockwork sits within column Standard Sizes Length (mm) Example Application in Plan View Beam/Column Accommodated Your Application Please note: Install at 225mm vertical centres Quantity required 2. Special Internal Column Tie Used when blockwork sits outside column Example Application in Plan View Example Design Your Application 3. Your Details Contact:...