Product Data Sheet ASMACO GP SILICONE SEALANT Product Description: ASMACO GP is a high quality single component acetic cure silicone sealant which vulcanizes on exposure to moisture in the air at room temperature, to produce a flexible elastomeric sealant. It is suitable for all common construction and glazing application. It is easy to apply and offers excellent adhesion to a variety of nonporous substrates such as glass, glazed ceramic tiles and aluminum. It is resistant to ozone, ultra-violet radiation and temperature extremes. Easy to use one component type. Fast curing Permanently elastic Very good unprimed adhesion Antifungal to suit sanitary and wet area applications Cures at room temperature at ambient humidity conditions. Outstanding adhesiveness to many non porous substrates, including Glass, Glazed Ceramics, Aluminum, Masonry, some Plastics etc … • Excellent resistance to weathering, moisture, ozone, UV, temperature Extremes etc… Nonstructural glazing Structural attachment of many panel systems Demanding sanitary applications Panel stiffener applications Aluminum, steel, painted metal, EIFS, granite and other stone, concrete, brick and plastics Typical Properties: ASMACO GP SILICONE SEALANT General Purpose Application Antifungal Cure system Color Specific Gravity Slump Skin over time @ 25oC, Minutes max, Tack free time, minutes @ RT, Approx Application temperature, o C Cure rate, mm/day Hardness, Shore A, Approx Elastic Recovery % Approx MECHANICAL PROPERTIES, Tensile @100% elongation, MPa, Approx. Tensile Strength, MPa, Approx. Elongation at Break, % , Approx

Product Data Sheet Usage Instructions: ASMACO GP is supplied as a ready to use product. The product can be used with normal caulking guns. Surface must be clean, dry and should be free from oil, grease, dust and frost. After suitable joint preparation and masking, attach the nozzle to cartridge, cut to required dimension and the sealant is gunned into gap continuously. The non sag paste consistency of the material makes it very friendly to use, easy to tool with spatula. The product cures at room temperature when it is exposed to moisture and the curing happens from surface to inside the sealant....

Product Data Sheet Shipping Limitations: None Note The information and data contained in the product data sheet is believed to be accurate and reliable; however, it is the user’s responsibility to determine suitability of the product for usage. Since the supplier cannot know all the uses, or the conditions of use to which the product may be exposed, no warranties concerning the fitness or suitability for particular use or purpose are made. It is the user’s responsibility to thoroughly test any proposed use of our products and independently conclude satisfactory performance in the application...