DATA SHEET Enova® DGX DXLink 4K60 Fiber Output Board TM The Enova DGX DXLink 4K60 Fiber Output Board is HDMI 2.0 and HDCP 2.2 compliant. It supports 4K60 4:4:4 video and High Dynamic Range (HDR) for pixel-for-pixel image reproduction without chroma subsampling. It has four outputs per board and transmits audio, video, control, USB 2.0, and Ethernet over duplex fiber to a DXLink 4K60 Fiber receiver up to 300 meters away. Each output includes a Multi-Mode Duplex (MMD) SFP, which can be replaced with a Single-Mode Duplex (SMD) SFP if needed. It is compatible with DGX 100-Series enclosures and benefits campus-wide distribution of sources between classrooms, military applications, casinos, arenas, and museums. Common Applications The Enova DGX DXLink 4K60 Fiber Output Board is ideal for applications where the demands of high-resolution video clarity, long distance transmission and maximum security need to be met without compromise including campus-wide distribution of sources that are shared between classrooms, secure military applications, casinos, arenas, and museums. Perfect 4K60 4:4:4 Video - Ideal for users that can benefit from processing the full fidelity of their displays High Dynamic Range (HDR) and Deep Color Support – Support HDR10 and 36-bit per pixel deep color HDMI 2.0 & HDCP 2.2 - Supports the latest video standards to realize the full capabilities of HDMI interfaces USB 2.0 - High-speed USB 2.0 data from devices like web cameras and storage devices are transmitted without the need for separate cables. As Always, Just One Cable – Just like all current AMX DGX Fiber solutions, video, audio, and control are delivered over a single cable. Many competitive products require two or more cable runs which adds significant cost. Hot Swappable – Easily add or replace I/O boards at any time after deployment - the system automatically recognizes the new configuration and activates the boards. Single MMD SKU – All Fiber Modules include a Multi-Mode Duplex (MMD) SFP module. Customers may replace these with their own Single-Mode Duplex (SM

Specifications GENERAL Regulatory Compliance Safety Certification Recommended Accessories Must be used in conjunction with an Enova DGX 100 Series 800, 1600, 3200, or 6400 Digital Media Enclosure and a DXLink 4K60 Fiber Receiver. DXLink 4K60 Fiber Boards must be used with DXLink 4K60 Fiber Transmitters and Receivers. See Enova DGX Digital Media Switcher Enclosure for regulatory compliance Class 1 Eye safe per requirements of IEC 60825-1 / FDA CDRH 21 CFR 1040 DXLink 4K60 HDMI Fiber Receiver FG1010-565-01 (DXFP-RX-4K60) or FG1010-565-02 (DXFP-RX-4K60-TAA) Signal Transport – DXLink w/Multimode...

- Must be used in conjunction with an Enova DGX 800, 1600, 3200 or 6400 Digital Media Enclosure built after June 1, 2016. Yes, HDR10 with ST.2084 EOTF - Output of HDR formats require any downstream DXLink DXFP-RX4K60 Scaler to be placed in Bypass mode to pass as HDR. Audio Format Support Dolby Atmos, Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD MA, DTS-HD High Resolution, DTS, 2 CH through 8 CH L-PCM - Dolby Digital and DTS support up to 48 kHz, 5.1 Channels Audio Resolution - When a downstream DXFP-RX- 4K60 is in the signal path, audio formats other than 2CH LPCM and Dolby Digital...

USB HID and USB 2.0 are supported point-to-point to DXLink 4K60 HDMI Receivers. The DXLink Output board is automatically configured as either Host or Device depending on the mode selected on the attached DXLink 4K60 Receiver High-Speed, Full-Speed and Low-Speed Support USB 2.0 Low Power Device Support, 100mA supply per Mini-USB Port Founded in 1982 and acquired by HARMAN in 2014, AMX® is dedicated to providing AV solutions for an IT World. AMX solves the complexity of managing technology with reliable, consistent and scalable systems comprising control, video switching and distribution, digital...