PRODUCT DATA SHEET Amvic Insulated Concrete Forms (ICF) are stay in place formwork manufactured using two 2.5" (63.5mm) Type II/Type 2, closed cell, Expanded Polystyrene (EPS) panels connected by polypropylene webs placed at 6" (152mm) on center. The forms offer a 6-in-1 system that provides structure, insulation, vapor barrier, air barrier, sound attenuation and attachments for interior finishes and exterior cladding. Completed Amvic ICF walls offer a sustainable and resilient building structure with R-Value of 22, STC rating of 50+ and a fire resistance rating (FRR) of 3+ hours. Applications • Below and above grade walls • Frost walls • Additions to existing buildings • Multi-story residential and commercial construction • Demising walls in high-rise construction • Institutional buildings • High wind/hurricane areas Amvic ICF ensures exceptional quality, reduced construction time and labor costs. • One of the strongest ICF with form capacity strength of 865 psf (41 kPa). • Fully reversible FormLock™ interlocking system with a depth of 1" (25mm) which provides superior connection strength between blocks. • Webs have built-in clips which can hold two courses of reinforcing steel greatly reducing the need for additional tying. • Withstands internal vibration. • Manufactured with over 60% recycled materials (by weight). • Generates less than 1% construction waste. Code Approvals • QAI Listing #B1061-2 Density Compressive Strength Flexural Strength Thermal Resistance Water Vapor Permeance Water Absorption Dimensional Stability Limiting Oxygen Index Trueness and Squareness (Maximum) ASTM C550 Edge: 0.03125 in/ft Length and Width: 0.06250 in/ft Surface Burning Characteristics Form Capacity Strength Fire Resistance Rating (FRR) 501 McNicoll Avenue Toronto, ON, CA, M2H 2E2 Toll Free: 1 (877) 470-9991 • Fax: (416) 759-7402 www.amvicsystem.com BUILD TO A HIGHER STANDARD

PRODUCT DATA SHEET