PRODUCT DATA SHEET 501 McNicoll Avenue Toronto, ON, CA, M2H 2E2 Toll Free: 1 (877) 470-9991 • Fax: (416) 759-7402 Envirosheet is a non-structural, rigid insulation board made from closed cell Expanded Polystyrene (EPS) offering cost effective performance. Designed to be installed as continuous insulation, reduce thermal bridging and directly improve building envelope performance. Envirosheet's exceptionally low, long term, inservice water absorption properties allow it to maintain its specified thermal performance and durability when installed for slab on grade or below grade applications. Amvic Advantage • Exceptional Long-Term Thermal Resistance (LTTR). • Increased thermal resistance in lower temperatures. • High vapor permeance allowing wall assemblies to dry over time. • Does not promote growth of mold and mildew. • No off-gassing and does not contain HFCs, CFCs or HCFCs. • Each panel is easy to handle due to the low weight and can be easily cut. • The availability of larger panels help improve job site efficiency and reduce labor costs. www.amvicsystem.com BUILD TO A HIGHER STANDARD

ENVIROSHEET Availability Envirosheet is available in a wide range of thicknesses ranging from 1/2" (13mm) to 6" (152mm). Standard board dimensions include 4x8', 4x9' and 4x10' (1.2x2.4m, 1.2x2.7m and 1.2x3.0m). Applications • Under concrete slab • Foundation walls • Ice rinks • Frost walls • Exterior above grade walls • Agricultural buildings The maximum continuous operating temperature for Envirosheet is 158°F (70°C). EPS exposure to ultra violet (UV) is limited to a thin layer causing slight discoloration and surface dusting. The material underneath remains unaffected maintaining its properties....