MDS Acousticork Underscreed U34C
3Pages

{{requestButtons}}

Catalog excerpts

MDS Acousticork Underscreed U34C - 1

U34C Agglomerated recycled rubber mixed with cork and EVA foam resilient layer for impact noise insulation of floating screed A C O U S T I C A L R E S U LT S P R O D U C T S P E C I F I C AT I O N “___mm resilient acoustic underscreed made of agglomerated recycled SBR (Stirene Butadiene Rubber) combined with EVA foam and Cork with PU (polyurethane) elastomer bonding agent for impact noise insulation of floating screeds, with a density of 600 kg/m³ and an impact noise reduction ΔLw of___dB.” ▸▸ Impact noise reduction ▸▸ High load capacity with low deflection ▸▸ Long-term resilience ▸▸ Produced from recycled and natural materials Others sizes available upon request THERMAL PROPERTIES PHYSICAL AND MECHANICAL PROPERTIES Specific Weight (Kg/m³) ➀ ➀ ASTMF1315 ➁ ASTMF152 ➂ ASTM F36 ➃ ISO 092/19 ➄ For both thicknesses 6/3 and 8/4 mm

Open the catalog to page 1
MDS Acousticork Underscreed U34C - 2

❶ Concrete floating screed with 70mm thickness ❷ Agglomerated resilient layer - U34C Normalized impact pressure level L [dB] ❸ Reinforced concrete slab of thickness 140mm DYNAMIC STIFFNESS PHYSICAL AND MECHANICAL PROPERTIES Normalized impact sound pressure level of the reference floor with the floor covering under test 0.5 Ln,r,0 Normalized impact sound pressure level of the Lab reference floor Dynamic Stiffness (MN/m³) ➀ 100 Note: Following ISO8013-1998 measured in Cantilever T

Open the catalog to page 2
MDS Acousticork Underscreed U34C - 3

G E N E R A L I N S TA L L AT I O N I N S T R U C T I O N S The following installation instructions are recommended by Amorim Cork Composites, but are not intended as a definitive project specification. They are presented in an attempt to be used with recommended installation procedures of the flooring manufacturers and screed. RoomConditions Temperature > -5ºC / Roommoisture content < 75%. Subfloor All subfloor work should be structurally sound, clear and level. The moisture content of the subfloor should not be more than 2.5% (CM) by weight measured on concrete subfloors. Perimeter...

Open the catalog to page 3

All Amorim Cork Composites catalogs and technical brochures

  1. ACM30

    1 Pages

  2. T04 maximum

    5 Pages

  3. T85 comfort

    4 Pages

  4. T27 force

    4 Pages

  5. T61 balance

    5 Pages

  6. UNDERL AYS

    8 Pages

Archived catalogs