Material Data Sheet Exterior Primary Deck Covering ACM30* is a cork composite material specially designed to be used as an exterior primary deck covering from 5 to 50mm thick, for levelling and fairing on metallic substrates. Designed to fire standards with additional unique features such as exceptional lightweight, low thermal conductivity, damping performance and versatility. ACM30 is a sustainable ecological solution, that contributes to decrease the carbon footprint providing benefits in green shipbuilding and comfort in flagged ships. These unique characteristics contribute to improve vessel performance and rating and consequently energy savings. *Material available in sheets only. Density (kg/m3)(1) 320-420 Thermal conductivity [W/mºK](2) 0,065* Compression modulus @ 10mm [MPa] Bending modulus @ 10mm [MPa] Loss factor @ 15mm (3) ASTM E758 & SAE J1637 Oberst Method Acoustic isolation Certified to IMO Res. MSC.307 (88) – (2010 FTP Code) Annex 1, Part 5 MSC / Circ.1120, compliant with the Council Directive 2014/90 EU of the European Parliament and of the Council of the 23 July 2014 on marine equipment directive and repealing Council Directive 96/98/EC and EU-US Mutual Recognition Agreement 2004/425/EC. Fire resistance EC Type Examination (Module B) Certificate No. MED 1750072 EC (Module D) Certificate of Conformity No. MED 1750094 Thermal insulation USCG Approval number 165.106 / EC0038 / MED 1750072 Issued by Lloyd’s Register Verification Ltd Notified Body Nº 0038 Sustainable and energy efficient The data provided in this Material Data Sheet represents typical values. This information is not intended to be used as a purchasing specification and does not imply suitability for use in a specific application. Failure to select the proper sealing product may result in either product damage or personal injury. Please contact Amorim Cork Composites regarding recommendations for specific applications. Amorim Cork Composites expressly disclaims all warranties, including any implied warranties or merchantability or of fitness for a particular purpose. Amorim Cork Composites is not liable for any indirect, special, incidental, consequential, or punitive damages as a result of using the information listed in this material data sheet, any of its brochures, its products or any future use or re-use of them by any person or entity. For contractual purposes, please request our Product Specifications Sheet (PDA).