bar grating platforms and treads Fabricated Products perforated metal architectural mesh façade railing infill panels FRP platforms, grating and railing QUALITY PRODUCTS – AROUND THE GLOBE

QUALITY PRODUCTS – AROUND THE GLOBE Alabama Metal Industries Corporation (AMICO) is a leading international manufacturer and fabricator of high quality electroforged bar grating, expanded metal, safety grating, swaged and press locked grating, riveted grating, custom heavy-duty grating, fiberglass grating and structures and perforated metal. With over a century of expertise, AMICO has a superior understanding of manufacturing techniques, capabilities and applications associated with these products. As both a manufacturer and fabricator of industrial and architectural products, our main objective...

Use our new bar grating calculator at www.amico-grating.com/calculator Riveted Grating Stair Treads Fiberglass Grating Expanded Metal Perforated Metal

Grating Design Tools These new calculators help you save time eliminate risk! If you are uncertain about which type of . grating to use, try our online calculator. ; You can enter your project specifics and our calculator will recommend the appropriate grating. This powerful online tool allows you to compare several grating alternatives so you can optimize for weight cost, or both. It saves you valuable time by eliminating tedious manual calculations and eliminates the risk of errors. Save money and time by using WELDED STEEL BAR GRATING Standard panel widths are 2'-0 & 3'-0. 4'-0 panel widths...

Use our new bar grating calculator at www.amico-grating.com/calculator welded (W) 1-3/16” C/C Bearing Bars 19-W-4 press-locked (P) 1-3/16” C/C Bearing Bars 19-P-4 19-P-2 NON-SERRATED & SERRATED NON-SERRATED & SERRATED LOAD & DEFLECTION TABLE General: Loads and deflections are theoretical and based on static loading. Approx. Bar Symbol Weight Size psf W/P-19 PANEL WIDTH (inches) No. of Bars 1/8” Bar 3/16” Bar No. of Bars 1/8” Bar 3/16” Bar SPAN (Direction of Bearing Bar) U = Allowable uniform load, psf D = Deflection due to U, in. C = Allowable concentrated load per ft. of grating width, lbs D...

Steel Bar Grating welded (W) 15/16” C/C Bearing Bars 15-W-4 NON-SERRATED & SERRATED LOAD & DEFLECTION TABLE press-locked (P) 15/16” C/C Bearing Bars 15-P-4 15-P-2 NON-SERRATED & SERRATED General: Loads and deflections are theoretical and based on static loading. Approx. Bar Symbol Weight Size psf W/P-15 PANEL WIDTH (inches) No. of Bars 1/8” Bar 3/16” Bar No. of Bars 1/8” Bar 3/16” Bar No. of Bars 1/8” Bar 3/16” Bar Note: P-Press Locked cross bars typically extend 1/8” each side. W-Welded cross rods may extend 1/8” each side. Panel widths shown below do not include these extensions.

Steel Bar Grating Close-Mesh welded (W) 13/16” C/C Bearing Bars 13-W-4 NON-SERRATED & SERRATED Use our new bar grating calculator at www.amico-grating.com/calculator press-locked (P) 13/16” C/C Bearing Bars 13-P-4 13-P-2 NON-SERRATED & SERRATED LOAD & DEFLECTION TABLE W/P-13 PANEL WIDTH (inches) No. of Bars 1/8” Bar 3/16” Bar No. of Bars 1/8” Bar 3/16” Bar No. of Bars 1/8” Bar 3/16” Bar Note: P-Press-Locked cross bars typically extend 1/8” each side. W-Welded cross rods may extend 1/8” each side. Panel widths shown below do not include these extensions.

Steel Bar Grating Close-Mesh welded (W) 11/16” C/C Bearing Bars 11-W-4 NON-SERRATED & SERRATED LOAD & DEFLECTION TABLE Approx. Bar Symbol Weight Size psf NON-SERRATED & SERRATED General: Loads and deflections are theoretical and based on static loading. W/P-11 PANEL WIDTH (inches) press-locked (P) 11/16” C/C Bearing Bars 11-P-4 11-P-2 Note: P-Press-Locked cross bars typically extend 1/8” each side. W-Welded cross rods may extend 1/8” each side. Panel widths shown below do not include these extensions. Widths in yellow available for Press-Locked grating only

Steel Bar Grating Close-Mesh welded (w) 5/8” C/C of Bearing Bars 10-W-4 Use our new bar grating calculator at www.amico-grating.com/calculator press-locked (P) 5/8” C/C of Bearing Bars 10-P-4 10-P-2 Cross Bars 2” C/C NON-SERRATED & SERRATED NON-SERRATED & SERRATED P-Press-Locked cross bars typically extend 1/8” each side. W-Welded cross rods may extend 1/8” each side. Panel widths shown below do not include these extensions. LOAD & DEFLECTION TABLE Approx. Bar Symbol Weight Size psf W/P-10 PANEL WIDTH (inches) Widths in yellow available for Press-Locked grating only

Steel Bar Grating Close-Mesh welded (W) 1/2” C/C Bearing Bars 8-W-4 press-locked (P) 1/2” C/C Bearing Bars 8-P-4 Welded Panels Max 2’-0 Width Cross Rods 4” C/C NON-SERRATED & SERRATED LOAD & DEFLECTION TABLE Approx. Bar Symbol Weight Size psf No. of Bars 1/8” Bar 3/16” Bar No. of Bars 1/8” Bar 3/16” Bar No. of Bars 1/8” Bar 3/16” Bar General: Loads and deflections are theoretical and based on static loading. W/P-8 PANEL WIDTH (inches) Note: Press-Locked cross bars typically extend 1/8” each side. W-Welded cross rods may extend 1/8” each side. Panel widths shown below do not include these extensions....

Steel Bar Grating Close-Mesh Use our new bar grating calculator at www.amico-grating.com/calculator WELDED (W) 7/16” C/C Bearing Bars 7-W-4 press-locked (P) 7/16” C/C Bearing Bars 7-P-4 Welded Panels Max 2’-0 Width Cross Rods 4” C/C Cross Bars 4” C/C NON-SERRATED ONLY LOAD & DEFLECTION TABLE Approx. Bar Symbol Weight Size psf General: Loads and deflections are theoretical and based on static loading. Non-Serrated Only P-7 PANEL WIDTH (inches) No. of Bars 1/8” Bar 3/16” Bar No. of Bars 1/8” Bar 3/16” Bar No. of Bars 1/8” Bar 3/16” Bar NON-SERRATED & SERRATED Note: P-Press-Locked cross bars typically...