*myarchiexpo

AD-464 Models

1 / 2 PagesView full catalog

AD-464 Models

Product catalog summary

Specifications:

Maximum Capacity: 460 lb (208.65 kg)
Minimum Load Size: 250 lb (113.40 kg)
Tumbler Dimensions: Diameter 69-1/8" (175.59 cm), Depth 80-5/16" (203.99 cm)
Tumbler Volume: 175 cu ft (4955.44 L)
Door Opening: 53-1/4" x 49" (135.26 cm x 124.46 cm)
Cabinet Dimensions: Width 122" (309.88 cm), Operating Depth 95" (241.30 cm), Full-Tilt Depth 118" (299.72 cm)
Weight: Net 10,270 lb (4,658.39 kg), Shipping 10,425 lb (4,728.70 kg)
Voltage: 208-480v, 3-phase, 50/60 Hz
Motors: Tumbler/Drive 7-1/2 hp (5.59 kW), Blower/Fan 25 hp (18.64 kW), Burner Blower 1-1/2 hp (1.12 kW)
Heat Input: 2,800,000 Btu/hr (705,588 kcal/hr)
Airflow: 13,000 cfm (368.12 cmm)
Exhaust: Diameter 24" (60.96 cm), Max Back Pressure 1.25 in WC (3.11 mb)
Compressed Air: Pressure 80 psi (± 10 psi), Volume 15-19 cfh (0.42-0.54 cmh)

Electrical Service Specifications:

Gas Models: Circuit breakers must be thermal/magnetic motor curve type. Voltage options include 208, 220, 240, 460, 480, 230, 380, 400, and 416 volts with varying total current and wire sizes.
Steam Models: Similar requirements as gas models with specific voltage and current ratings.

Important Notes:

208 VAC and 230/240 VAC are not interchangeable; specify voltage when ordering.
Circuit breakers for 3-phase dryers must be 3-pole type.

Catalog excerpts

QY160053 1/17 88 Currant Road, Fall River, MA 02720-4781 • 508.678.9000 • www.adclaundry.com

Open the catalog to page 1

•DUCTWORK MUST BE A MINIMUM OF 24* DIAMETER (60.96 cm). DUCTWORK SIZE VARIES WITH INSTALLATION CONDITIONS. « SIZE OF PIPING TO DRYER VARIES WITH INSTALLATION CONDITIONS. CONTACT FACTORY FOR ASSISTANCE. •DUCTWORK MUST BE A MINMUM OF 24* DIAMETER (60.96 cm). DUCTWORK SIZE VARIES WITH INSTALLATION CONDITIONS. SIZE OF PPNG TO DRYER VARIES WITH INSTALLATION CONDITIONS. CONTACT FACTORY FOR ASSISTANCE.

Open the catalog to page 2