Overview

This document provides detailed technical specifications, components descriptions, and assembly sequences for the ЯD system, a modular construction formwork and shoring solution. It includes multilingual terminology and product references in Italian, French, English, Spanish, German, and Russian.

1. Product Components and Terminology

• Drop-head (Testa cadente ЯD): A key component used for quick release in formwork systems, available in galvanized and painted finishes.
• Connection Handle (Maniglia di collegamento ЯD): Used to connect elements securely, offered in painted and galvanized versions.
• Compensation Support (Supporto ЯD per compensi): Supports adjustment elements to ensure proper alignment and compensation.
• Shore Connection Element (Collegamento puntelli): Connects shore props, available in various lengths (0.75 m, 1.2 m, 1.5 m, 1.55 m) and finishes (painted, galvanized).
• Clamp Parapet (Parapetto ЯD a morsa): Clamp system for securing parapets, available in painted and galvanized versions.
• Wall Support (Supporto ЯD per parete): Supports for wall formwork, offered in galvanized and painted finishes.
• Wood Beam H20 (Trave in legno H20): Standard wooden beam used in conjunction with the system.
• Fork Head and Axial Pin: Galvanized fork head (L=200 mm) and axial pin (Ø 12 mm) for secure connections.
• Telescopic Bar (Asta telescopica): Galvanized adjustable bar for length compensation.
• Storage Rack (Contenitore ЯD per pannello): Galvanized rack for storing panels.

2. Technical Specifications and Weights

The document lists various product codes with corresponding weights (in kg and lb) and dimensions (lengths in meters and feet). Examples include:

• Panels: Painted panels with lengths ranging from 1.3 m to 4.11 m.
• Connection elements: Shore connection elements in galvanized and painted finishes with weights ranging approximately from 0.95 kg to 32.5 kg depending on size.
• Handles and clamps: Weights vary from 0.3 kg to 15 kg depending on type and finish.
• Wood beams and accessories: Weights range from 0.19 kg (axial pin) to 11 kg (wood beam).

3. Finishes and Coatings

Products are available in two main finishes:

• Painted (verniciato): For aesthetic and corrosion protection.
• Galvanized (zincato): For enhanced corrosion resistance, especially in outdoor or harsh environments.

4. Assembly and Disassembly Sequence

The document includes a brief mention of the assembly sequence for the drop-head system, highlighting the beginning of disassembly procedures. This suggests a focus on ease of installation and removal, critical for efficient construction workflows.

5. Manufacturer and Contact Information

Amadio & C S.p.A., based in Italy, is the manufacturer, with contact details provided for both Italy and the USA offices.

Critical Information and Best Practices

• Selection of components should consider the required finish (painted vs galvanized) based on environmental exposure.
• Proper matching of component sizes and weights is essential for structural integrity and ease of handling.
• Use of telescopic bars and compensation supports allows for precise adjustments during formwork setup.
• Clamps and connection handles must be securely installed to ensure safety and stability.
• Following the recommended assembly and disassembly sequences improves efficiency and reduces risk of damage.