Roof edge trim profiles
20Pages

Roof edge trim profiles T plus TW 125 plus TA TA-4F TAG art-line 1

alwitra product systems Roof edge trim profiles are part of the practically proven alwitra waterproofing system. Furthermore, this system waterproofing membranes coated metal sheets roof edge trim profiles incl. colour coating wall flashing profiles incl. colour coating wall capping profiles incl. colour coating colour coating snow guard profiles rooflights and natural smoke vent systems paving slab supports flat roof vents rainwater outlets

Roof edge trim profiles by alwitra From one roof edge to the other: As the market leader in high-quality roofing sys- tems, alwitra provides all waterproofing components byway of an integrated system information on design and alwitra has set new standards for the entire industry by introducing numerous prod- uct innovations. In particular, this is true for the patented and practically proven Roof edge trim profile , .t . , t . ... alwitra roof edge trim profiles. Roof edge trim profile Roof edge trim profile oured coating, contribute to the overall architectural impression of the building....

Roof edge trim profiles Information on design and execution Information on design and execution of roof edges with roof edge trim profiles: (National guidelines and regulations must be observed.) The height of the roof edge trim above the finished roof surface (roof waterproofing, gravel or slabs) should be approx. 100 mm or roof slope over 5° The roof edge trim profile must overlap the upper edge of the render finish or the façade cladding by at least 50 - 100 mm. The drip edge should be at least 20 - 40 mm away from the building structure. from 8 to 20 m building height over 20 m building...

alwitra roof edge trim profiles offer unique advantages With industrially manufactured alwitra roof edge trim profiles straight or curved (on plan) roof edges without or with upstands (parapet) can be designed in compliance with standards and directives. alwitra roof edge trim profiles: permanently tension-free and waterproof flashing >> The alwitra solution for The tape is placed loose in the alwitra profile, however, it cannot slip out. The profile moves independently from the roof waterproofing and does not cause any tension. Stresses deriving from movements perpendicular to the roof...

Roof edge trim profile Series T plus • two-piece extruded aluminium profile • front height: 105 - 175 mm • time-saving and easy installation • for roof slopes > 5° or with parapet joining plate alwitra roof edge trim profiles series T can be installed: • on roof edges with upstands (parapet) and • on roof edges of roofs with a slope > 5° alwitra roof edge trim profile Series T plus: • two-piece extruded aluminium profile, corrosion resistant • 2.5 m long top caps for easy connection of various waterproofing membranes • 5.0 m long T-profiles in 4 different front heights (105, 125, 150, 175...

Roof edge trim profile Series T plus – application examples

Roof edge trim profile Series TW 125 plus • two-piece extruded aluminium profile • time-saving and easy installation • for an optically unobtrusive roof edge • for covering façades and external thermal insulation composite systems • for roof slopes ≤ 5° with parapet or edge boards projection particleboard = façade thickness -100 to -120 mm faÇade or External Thermal façade or ETICS Insulation Composite Systems (ETICS) T-profileProfil TW top cap joining plate Deckprofil tape Stoßverbinder noise suppression strip alwitra roof edge trim profiles series TW 125 can be installed: • on roof edges...

Roof edge trim profile Series TW 125 plus – application examples Moving the flashing against the roof waterproofing sealing towards the roof area allows for covering the façade or External Thermal Insulation Composite Systems (ETICS) by 50 mm 1 at a front height of 62.5 mm. The max. thickness of the façade or the external thermal insulation composite system is 120 mm. For thicknesses of more than 120 mm a plywood sheet (min. 24 mm thick), providing sufficient projection, should be installed to allow fastening of the trim profile. Installation over non-load bearing element (cladding)...

Roof edge trim profile Series TA • multi-piece extruded aluminium profile • front height series TA: 80 - 200 mm • with height-adjustable, horizontally moveable brackets 2 edge trim profile Deckprofil 1 fillet plate (from TA 125) Halterung bracket 5 joining plate Stoßverbinder 5 alwitra roof edge trim profiles series TA can be installed: • on straight and curved (on plan) roof edges • on roof edges with and without upstands (parapet) • on roof edges with timber hard edge alwitra roof edge trim profile series TA: • multi-piece extruded aluminium profile, corrosion resistant • 2.5 m long cover...

Roof edge trim profile Series TA-4F • multi-piece extruded aluminium profile • front height series TA-4F: 150 - 200 mm • with patented 4F-brackets • Infinitely adjustable in all directions hinged angle bracket 150 (275) Deckprofil edge trim profile 3 Anschlussbrücke 2 top cap 1 alwitra roof edge trim profiles series TA-4F can be installed: • on straight and curved (on plan) roof edges • on roof edges with and without upstands (parapet) • on roof edges with timber hard edge alwitra roof edge trim profile series TA-4F: • multi-piece extruded aluminium profile, corrosion resistant • 2.5 m long...

Roof edge trim profile Series TAG • multi-piece aluminium profile • front height: 250 - 1,050 mm • supplied with patented 4F-brackets as standard • Infinitely adjustable in all directions edge trim profile Deckprofil 2 top cap 1 fillet plate 100150 (optional) Anschlussbrücke fillet plate 150 (option) 4F-Halterungen/Stoßverbinder 4F brackets/joining plate Distanzplatten plastic spacers Niveauplatten level plates Anschlussbahn tape alwitra roof edge trim profiles series TAG can be installed: • on straight and curved (on plan) roof edges • on roof edges with and without upstands (parapet) • on...