Product guide
143Pages

- MB-SG50 > SEMI INDIVIDUAL SOLUTIONS Roller shutters systems: >

T he Bielsko-Biała-based company ALUPROF S.A. was founded as a result of a merger of two enterprises in the aluminium systems business: Metalplast-Bielsko S.A. the leader on the Polish market for architectural aluminium systems, and Aluprof Sp. z o.o. the leading supplier of aluminium systems for production of roller blinds and roll-up gates. The idea of merging these two companies, functioning within the Capital Group Grupa Kęty, was to establish a company with the potential to become the leading supplier and distributor of aluminium systems in Central and Eastern Europe and build a major...

PRODUCTION ALUPROF S.A. consists of plants with an area of almost 50,000 m that are outfitted with modern equipment, e.g. an automated line for production of combined profiles, six latest-generation lines for production of profiles and roller blind boxes, an efficient powder paint shop, high bay warehouses, and efficient transport. Thermal separator crimping line The line for crimping thermal separator in combined profiles uses fully automated manufacturing processes. Modern devices by Hermann MҼller from Switzerland provide efficient production of thermally insulated window, door, and...

QUALITY An important part of the companys operation > Apart from the main warehouse is striving to continuously improve the level of > in Bielsko-Bia҅a and the network of several wholesale outlets in Poland, distribution is quality of products and customer service. > also conducted by partnership companies A lot of investments being carried out revolve > located in, among other countries, around this aim. We always try to ensure > Russia, Ukraine, Hungary, Germany, Great Britain, Romania, and the Czech that our products meet the provisions of > Republic. the European standards and the...

RESEARCH AND Our attention to the entire process of DEVELOPMENT design, manufacture, and obtaining the appropriate validating documents has the In our activities, we put strong emphasis result that the final product based on Aluprof on the quality of our products and the systems can not only meet the requirements development of our offer. The company has of relevant standards and guarantee high quality, but also ensure full safety and experienced design personnel and specialist comfort of use. software for designing, thermal and strength calculations, and other kinematic simulations. Both...

antiburlgar and fire tests www.aluprof.eu 6 >

SYSTEM SYSTEM SYSTEM SYSTEM SYSTEM SYSTEM

Freedom of design The wide offer of profiles allows the architects and designers to realise even the most enterprising ideas for aluminium and glass constructions. Wide possibilities of application The system is designed to construct and make lightweight flat curtain walls of hanging and filling type, as well as roofs, skylights, and other spatial constructions. Section depth: mullion s 15-185 mm, transom s 5-145 mm. Filling thickness range: 4-48 mm. High aesthetics. Variants of execution The shape of mullion s and transom s allows aesthetic faades to be built with visible narrow parting...

Boryspil International Airport , Kiev, Ukraine design / ǐБ. ŐڐސݐԑБɐՐݐڐ ސ. execution / ؐܐؐڐސ, ېڐؐՐ Proven strength Depending on partitions and external loads, the system includes the proper number of mullion s and transom s with different depths and moments of inertia ofIx=55-700 [cm4], selected so that the optimum use of aluminium is ensured and the costs of material are reduced effectively. For very heavy loads, all the mullion s can be additionally reinforced with special internal aluminium sections to enhance their strength even more. Excellent resistance to water penetration and air...

Proper compensation of thermal Fire safety Reliable fasteners elongations The layered structure of the window head The accessories that come with the system, Due to the development of correct mullion - & sill area in which non-flammable materials brackets, and aluminium connectors to to- transom joint that considers changes in such as mineral wool and drywalls are used fasten the wall to the buildingǒs structure transom length according to temperature ensured that fire classification of EI30 are made of EN AW-6060 T66 aluminium and introduction of half- mullion s, different and EI60,...

Reduced labour demand Colour palette T ECHNICAL APPROVALS, CERTIFICATES Elimination of all types of cut-outs in side A wide selection of colours in the standard surfaces of the mullion s and fastening the palette allows the needs of the most Building Research Institute Warsaw filling by screwing the clamping strips using demanding customers to be satisfied. Colour IFT Rosenheim (Germany) self-tapping screws, without the necessity to coatings are applied by the powder painting RST Sankt Petersburg (Russia) pre-drill holes in the insulator, allowed labour or anodising methods....

Mullion cross-section Symmetrical angle joint ǖ cross-section MB-SR50 MB-SR50 Symmetrical angle joint cross-section SG-50 window in the curtain wall ֖ cross- section MB-SR50 MB-SR50 >

Transom cross-section MB-SR50 Articulated joint of transom s ǖ cross-section MB-SR50 >

MB-59S window in the curtain wall ǖ cross section Roof transom cross-section MB-SR50 MB-SR50 Roof window in the curtain wall ֖ cross-section MB-SR50 >

Mullion , RMG 1 ǖ cross-section MB-SR50 Transom , RMG 1 cross-section MB-SR50 >

Horizontal line ǖ transom cross-section > MB-SR50 PL Solution MB-SR50 Horizontal lineӔ is the aesthetic variant of the mullion and transom faade, in which horizontal and vertical partitions are emphasised. This is realised by using the appropriate masking (e.g. elliptical) strips to stress one direction of faade division, whereas in lines that are perpendicular to them, Horizontal line 秖 mullion cross-section the glass fastening strips are eliminated. When required, the connectors that MB-SR50 PL function between fillings can be used in these lines and masked with so-called weather silicone...