Wood finishes | Colour chart

Product catalog summary

Wood Finishes Catalog Overview
This catalog from Alubuild presents a range of wood finishes available for their composite panels. The finishes include Walnut Brown, Dark Oak, Mahogany Brown, Scottish Oak, Cedar Brown, Colonial Red, French Walnut, and Cream Oak, each identified by a unique code.

Characteristics of Wood Finishes

High durability and resistance to corrosion.
Resistance to chemical substances and UV rays.
High flexibility and resistance to marine environments.

These finishes are achieved through multilayer coatings that provide high UV resistance, allowing for a wide variety of wood finishes.

BUILDBOND Composite Panel Specifications

Composed of two aluminium sheets: AW 5005 (outer) and AW 3005/3105 (inner).
High resistance to atmospheric agents and suitable mechanical behavior.
Manufactured according to EOTA specifications and European standards EAD 090062-00-0404 and EAD 21046-00-1201.
Coated with polyvinylidene fluoride (PVDF 70/30) or high durability polyester (HDPE).

Color Consistency and Installation Guidelines

Colors do not contain toxic heavy metals like lead or chromium oxide.
Color shades may vary slightly from the final color of the aluminium coil, especially with metallic, special, and prismatic colors.
To ensure color consistency, it is recommended to order a project in a single batch.
All colors should be installed following the direction of the arrow printed on the protective film and on the back of the panel to prevent color variations.

Contact Information
Alubuild is located at Parque Industrial de Gême, 531, 4730-180 Vila Verde, Portugal. For inquiries, contact via phone at (+351) 253 142 750 or email at [email protected].

Catalog excerpts

ACABADOS MADERA | WOOD FINISHES | FINITIONS BOIS CATÁLOGO DE ACABAMENTOS MADEIRA www.alubuild.com

Open the catalog to page 1

CEDAR BROWN WALNUT BROWN MAHOGANY BROWN

Open the catalog to page 2

FRENCH WALNUT

Open the catalog to page 3

O painel compósito BUILDBOND é composto por 2 chapas de alumínio, de liga AW 5005 na face externa e liga AW 3005/3105 na face interna, conseguindo assim um painel com alta resistência aos agentes atmosféricos e comportamento mecânico adequado. El panel composite BUILDBOND está formado por 2 láminas de aluminio, AW 5005 en la cara externa y AW 3005/3105 en la cara interna con lo que consigue un panel con una alta resistencia a los agentes atmosféricos y un comportamiento mecánico adecuado. A Alubuild produz painéis compósitos de alumínio de acordo com as especificações da EOTA nas normas europeias...

Open the catalog to page 4

The BUILDBOND composite panel is composed of two aluminium sheets, an outer sheet of aluminium alloy AW 5005 and an inner sheet of alloy AW 3005/3105, thus succeeding in creating a panel with high resistance to atmospheric agents and suitable mechanical behaviour. Alubuild manufacturers aluminium composite panels which are classified according with EOTA specifications and European EAD 090062-00-0404 and EAD 2104600-1201 standards. Le panneau composite BUILDBOND est composé de 2 feuilles d’aluminium, d’alliage AW 5005 sur la face externe et d’alliage AW 3005/3105 sur la face interne, réalisant...

Open the catalog to page 5

Order your samples now [email protected] AVISO LEGAL | AVISO LEGAL As cores não contêm metais pesados tóxicos, tais como chumbo ou óxido de crómio. / As tonalidades de cor apresentadas nesta tabela podem variar ligeiramente da cor final da bobine de alumínio, especialmente com cores metálicas, especiais e prismáticas. / Também pode haver uma variação de tonalidade de lote para lote de bobina, para assegurar a consistência da cor, recomendamos encomendar um projeto num único lote. Todas as cores devem ser instaladas seguindo a direcção da seta impressa na película protectora e na parte de trás...

Open the catalog to page 6

Wood finishes | Colour chart

Wood finishes | Colour chart

Catalog excerpts

All ALUBUILD catalogs and technical brochures