Althon Z2000
4Pages

{{requestButtons}}

Catalog excerpts

Althon Z2000 - 1

Edge protection ♦ Galvanised steel: DX 51 D 275 NA to EN10142 Grating ♦ Mesh grating: galvanised steel Channel body ♦ Polymer concrete ♦ Compression resistance: ♦ Flexural strength: ♦ Water absorption: ♦ Density: ♦ Modulus of elasticity: ♦ Water penetration level: ♦ Material structure: based on polyester resin a 90 N/mm2 a 22 N/mm2 less than 0,05% 2,1 - 2,3 kg/dm3 25-35 kN/mm2 0 mm capillary free Description and sizes ♦ Drainage channel made of polymer concrete with sealable channel groove ♦ Integrated galvanised steel edge protection ♦ Connection facility for vertical discharge 0 160 in 500 mm length and 1000 mm length ♦ Interlocking joint system for an exact fitting of the channels ♦ Suitable for installation of MEADRAIN Top 2000 standard grating covers with standard locking mechanisms ♦ Fall type: stepped fall, without fall ♦ Loading classes: ♦ Total height: ♦ Total width ♦ Length Althon Limited, Vulcan Road South, Norwich, NR6 6AF T: 01603 488700 W: www.althon.co.uk E: sales@

Open the catalog to page 1
Althon Z2000 - 2

Channel units overview Channel without fall Product description Inlet sectional area ** [cm2] Inlet sectional area ** [cm2] Channel with stepped fall Product description Connection facility for vertical discharge Ø160 or silt box / gully Connection facility for corner and cross junction connection ** Cross section area from the grating surface to the invert of the channel Gully unit overview Product description Upper gully section for channel Z 2000. Pre-formed knockouts for deeper channel heights Middle gully section to increase total height Lower gully short section with preformed...

Open the catalog to page 2
Althon Z2000 - 3

Description and sizes ♦ Multipart execution with various of combinations of upper, intermediate and lower parts. ♦ Integrated galvanised steel edge protection ♦ Galvanised sediment bucket available as accessory ♦ Suitable for installation of MEADRAIN Top 2000 standard grating covers ♦ Open connection on both sides for the 2000 channel types. ♦ Pre-formed knockouts for making the perfect connection to the channel types 2010 and 2020. ♦ Connection facility for outlet connector 0 160 and 0 200 ooooo ooooo oooooooooo Description and sizes ♦ Optimal slot design for better discharge rates ♦...

Open the catalog to page 3
Althon Z2000 - 4

End caps for channel start and channel end Z 2000.SE 2 12 Z2000.SE = 270 Z2010.SE = 320 Z2020.SE = 370 Description and sizes galvanised steel EDP Number: Total height: Total width: Weight: MEA UK Limited Rectors Lane Pentre Deeside Flintshire CH5 2DH Telephone: 0 12 44/53 44 55 Fax: 0 12 44/53 44 77 uk.technical@mea.de www.mea-group.com MEA Polymer Beton B.V. Ambachtsweg 18 7021 BT Zelhem P.O. Box 90 7020 AB Zelhem The Netherlands tel: (+31) 314 62 77 62 fax: (+31) 314 62 77 77 sales.info@nl.mea.de www.mea-group.com Althon Limited, Vulcan Road South, Norwich, NR6 6AF T: 01603 488700 W:...

Open the catalog to page 4

All Althon catalogs and technical brochures

  1. KHB 250

    1 Pages

  2. KHB 375

    1 Pages

  3. HD1000

    7 Pages

  4. HD1500

    6 Pages

  5. HD2000

    6 Pages

  6. HD3000

    6 Pages

  7. HD3070

    2 Pages

  8. Althon Z1000

    8 Pages

  9. Althon S1000

    8 Pages

  10. SFA10

    4 Pages

  11. AH4C LH

    4 Pages

  12. R10C

    3 Pages

  13. SFA6

    4 Pages