Eco R Monobloc 400º/2H exhaust hood
3Pages

Eco R Monobloc 400º/2H exhaust hood LARGE INTERIOR RETENTION VOLUME STRAIGHT SKIRTS WHERE AN EXTRACTOR HOOD CANNOT BE INSTALLED REMOTELY Possibility of installing UV filtration Possibility of installing automatic flow regulation Possibility of installing integrated luminaires Installing fire extinguishing system available Hood ECO “R” MONOBLOC 400º/2H, built in all its parts of stainless steel with fine polished finish, being one of the most economical and competitive in the market and offering at the same time a great quality. Bell shape specially studied to give the whole maximum rigidity, with the minimum height to maintain, according to regulations, the filters at an angle of inclination between 45º and 60º on the horizontal. Its sides and the front are straight around the perimeter remaining at the same height. It has a new fastening system that facilitates its installation, making lateral displacement possible, until the perfect wall anchor is achieved. The assembly of all the visible pieces of the bell is done by bolts welded on the inside, thus giving the possibility ofdisassembling the assembly if necessary (to enter it by reduced steps or to expand it) and a great finish, as no rivets or screws are visible. Designed to incorporate 490x490x50 filters (Not included as standard). Installed fan with built-in motor 400ºC/2H with Applus certification CPF-0341.

Eco R Monobloc 400º/2H exhaust hood FAN 400ºC/200 H Enclosure in galvanized steel sheet. Turbine with forward blades, in galvanized steel sheet. External connection box. Homologation according to EN 12101-3: 2002, with certification Nº370-CPD-0580 and CPF Applus Finish: Anticorrosive in galvanized steel sheet MOTOR H-Class motors, continuous use S1 and emergency S2 use, with ball bearings. Three-phase 230/400v 50 Hz (up to 3/4 hp) and 400/690V 50 Hz (Powers higher than 3/4 hp) and Single-Phase 230v 50 Hz Maximum air temperature to be transported: Service S1-20ºc + 60º C continuous, Service...

DRAINAGE SYSTEM Drainage system to collect grease held by the filter collector, with threaded metallic plug outlet. Gutter around the perimeter to collect condensation from inside the shield or protector and sides. ECO R MONOBLOC 400º/ 2H LONGITUDES / LONGUEURS / LENGTHS FONDO/ PROFONDEUR/ DEPTH PARED / MURALE / WALL 1000 En un solo tramo En une seule pièce In a single piece Medidas superiores, múltiplos de estas Mesures supérieures, multiples de ces Multiple of these for different lengths CENTRAL / CENTRALE / ISLAND 1000 En un solo tramo En une seule pièce In a single piece Medidas...