ECO “R” exhaust hood
2Pages

ECO “R” exhaust hood • IDEAL FOR LOW CEILINGS • GREAT INTERIOR RETENTION VOLUME • STRAIGHT PANELS ECO "R" extractor hoods, with all visible parts made of stainless steel with a fine, polished finish, are one of the most affordable and competitive on the market, while still offering high quality. The hood's shape was especially designed to make the ensemble as rigid as possible, with the minimum height to keep filters tilted at an angle between 45º and 60º over the horizontal plane, per regulations. The sides and the front are straight along the entire perimeter, all at the same height. It has a new attachment system that makes installation easier, enabling lateral movement until reaching perfect wall attachment. All of the extractor hood's visible parts were assembled with bolts welded on the inside, thus making it possible to disassemble the ensemble if necessary (so it fits in reduced spaces, or to expand it) and a great finish with no visible rivets or screws. It can be manufactured with the compensated option (with air supply) ECO R COMPENSATED. Designed for 490x490x50 filters. Drainage system Drainage system to collect grease held by the filter collector, with threaded metallic plug outlet. Gutter around the perimeter to collect condensation from inside the shield or protector and sides. Filtration System With a filter holder designed to house different kinds of 490x490x50 filters: • Condensation: déployé galvanised mesh filters with double zigzag, providing greater contact surface area per filter and half-moon grid providing greater resistance to saturation and better condensation drainage. • Inertia (dynamic): filters with trapezoid stainless steel slats, providing better filtration with a greater air passage speed margin, since its sharp edges imbue the air with inertia that cannot follow the suspended grease particles, thus achieving low load loss. • Blended: this is a 490x490x25 mesh filter, with the same characteristics as the condensation ones before, and behind it, a 490x490x25 activated carbon filter, with activated carbon as an impregnated medium inside. Its porosity traps suspended particles that cause odour.

FONDO / PROFONDEUR / DEPTH LONGITUDES / LONGUEURS / LENGTHS PARED / MURALE / WALL En un solo tramo En une seule pièce In a single piece Medidas superiores, múltiplos de éstas Mesures supérieures, multiples de ces Multiple of these for different lengths CENTRAL / CENTRALE / ISLAND En un solo tramo En une seule pièce In a single piece Medidas superiores, múltiplos de éstas Mesures supérieures, multiples de ces Multiple of these for different lengths email: altex@altexs