BASIC exhaust hood
2Pages

BASIC exhaust hood • EXCLUSIVE SHIELD DESIGN TO PREVENT FUME BACKFLOW • OPTIONAL BUILT-IN FAN • NO INTERIOR REGULATION PLENUM BASIC extractor hood model, with all visible parts made of AISI.304 stainless steel with a fine, polished finish. The hood's shape has been especially studied to make the ensemble as rigid as possible, with metal sheet folds strategically placed to avoid any flat horizontal surface that would lead to condensation and grease drippings. It has a built-in attachment system to facilitate assembly. All of the extractor hood's visible parts were assembled with bolts welded on the inside, thus making it possible to disassemble the ensemble if necessary (so it fits in reduced spaces, or to expand it) and a great finish with no visible rivets or screws. Top safety with a U-shaped reinforcement gutter around the perimeter, with folded rounded sheet metal to prevent cuts. It has a series of galvanised mesh filters measuring 390x490x50. Drainage system Double drainage system, one to collect grease retained by the filter collector, with a high-capacity reservoir and a threaded metallic plug outlet, and another for the perimeter gutter that collects condensation from inside the shield. Filtration system With a filter holder designed to house different kinds of 390x490x50 filter: • Condensation: déployé galvanised mesh filters with double zigzag, providing greater contact surface area per filter and half-moon grid providing greater resistance to saturation and better condensation drainage. • Inertia (dynamic): filters with trapezoid stainless steel slats, providing better filtration with a greater air passage speed margin, since its sharp edges imbue the air with inertia that cannot follow the suspended grease particles, thus achieving low load loss. • Blended: this is a 390x490x25 mesh filter, with the same characteristics as the condensation ones before, and behind it, a 390x490x25 activated carbon filter, with activated carbon as an impregnated medium inside. Its porosity traps suspended particles that cause odour. email: altex@

FONDO / PROFONDEUR / DEPTH LONGITUDES / LONGUEURS / LENGTHS PARED /MURALE / WALL 1000 1200 En un solo tramo En une seule pièce In a single piece 1200 1500 1700 2000 2200 En un solo tramo En une seule pièce In a single piece Medidas superiores, múltiplos de éstas Mesures supérieures, multiples de ces Multiple of these for different lengths CENTRAL / CENTRALE / ISLAND 2500 Medidas superiores, múltiplos de éstas Mesures supérieures, multiples de ces Multiple of these for different lengths email: altex@altexs