ALPOLIC® Aluminum Faced Composite Panels
2Pages

ή Mitsubishi Plastics Composites America, Inc. Օ Standard ALPOLIC with Lumiflon FEVE fluoropolymer finishes are available in a broad spectrum of gloss levels, from 15 - 80%. Contact the manufacturer for minimum quantities and 1. Product Name availability. Lumiflon, in its ambient cure spray ALPOLIC Aluminum Faced Composite Panel product, allows close-matching field touch-up and recoat. 2. Manufacturer A-LOOK Mitsubishi Plastics Composites America, Inc. surfaces for interior and exterior application. 401 Volvo Parkway Stocked Chesapeake, VA 23320 Stone Series is a simulated stone fluoropoly - (800) 422-7270 mer finish combined with fluoropolymer colors in Fax: (757) 436-1896 white marble and red, pink, white and black E-mail: info@alpolic.com granite finishes. www.alpolic-northamerica.com ALPOLIC Lumiflon FEVE colors are available in full gloss range with minimum 1000 ft > 2 (93 m > 2 ) 3. Product Description coil coated orders. Allow 8 weeks for shipment Coatings on Aluminum Extrusions and Panels of custom colors. BASIC USE Complete custom color matching, avail - ASTM International ALPOLICʪ is a lightweight, rigid, bendable and able in ALPOLIC Lumiflon FEVE coatings, is durable aluminum faced composite panel subject to minimum order quantities. Strength on Flat Sandwich Constructions in widely used as an interior and exterior wall A selection of stock fluoropolymer colors is Flatwise Plane cladding in commercial and institutional appli - available in a quick ship program in 4 mm panel Օ cations. It offers flexibility in design through a thickness. Thermal Performance of Building Assemblies wide variety of fabrication techniques, includ - Quick Ship stock 4 mm thick ALPOLIC panel by Means of a Calibrated Hot Box ing panels into curves, angles and pan con - selections. Contact Mitsubishi Plastics Composites (Withdrawn figurations. America, Inc. (MPCA), customer service for color Burning and/or Extent and Time of Burning of COMPOSITION & MATERIALS and Self-Supporting ALPOLIC panels consist of a core of SHAPES & FABRICATION Օ thermoplastic material thermally bonded to ALPOLIC panels can be cut, routed and formed Coefficient of Linear Thermal Expansion of face sheets fabricated of aluminum 3105 H14 with conventional woodworking tools. Angle Plastics alloy, 0.020" (0.5 mm) thick or an equivalent. bends are formed by routing the back of the Vitreous Silica Dilatometer TYPES panel prior to shaping. The common pan shape Several types of ALPOLIC panels are available is formed by routing the back edges, trimming Evaluating including: the corners and bending and reinforcing the and Particle Panel Materials Օ edges. Օ ALPOLIC can be rolled on a pyramid or Climbing Drum Peel for Adhesives 4-stand roll bender to a curved shape for Օ panel curved corners or column covers. Bumping on a Determining Ignition Temperature of Plastics press brake also can be used to produce a Օ curved surface. Testing of Metallic Materials The bending radius of ALPOLIC 4 mm Օ SIZES panels is as small as 2" (51 mm). Corner radii Conducting Strength Tests of Panels for ALPOLIC panels are available in 3, 4 and 6 mm can be detailed as small as 1/8" (3.2 mm) using Building Construction thicknesses in standard widths of 50" and 62" the back routed method described in ALPOLIC (1270 and 1575 mm) and in standard lengths of literature. Burning Characteristics of Build ing Materials 122", 146" and 196" (3099, 3708 and 4978 mm). Օ A 4. Technical Data for Fire Tests of Roof Coverings APPLICABLE STANDARDS Օ American Architectural Manufacturers Associ- Determining the Rate of Air Leakage FINISHES a tion (AAMA) - AAMA 2605 Voluntary Through and Doors Under Specified Pressure Օ Specification, Performance Requirements and Difference Across the Specimen coil coat meeting AAMA 2605 (standard) Test Procedures for Superior Performing Organic > SPEC-DATA and MANU-SPEC ʪ are registered trademarks of Reed Elsevier Inc. The ten part SPEC-DATA format conforms to the editorial style of The Construction Specifications Institute and is used with their permission. The manufacturer is responsible for technical accuracy. 2009 Reed Construction Data. All Rights Reserved. TM size="-3">

Surface burning characteristics, ASTM E84 > Smoke developed index 10 > Vertical transmission, ASTM E108 (modified) Passed Passed > Ignition temperature, ASTM D1929 Flash ignition 716F (380аC) > Rate of burning, ASTM D635 CCI - > SPEC-DATA ժ and MANU-SPEC are registered trademarks of Reed Elsevier Inc. The ten part SPEC-DATA format conforms to the editorial style of The Construction Specifications Institute and is used with their permission. The manufacturer is responsible for technical accuracy. ʩ2009 Reed Construction Data. All Rights Reserved. TM size="-4">