Catalogs >
ALPI >
SILVER RAIL BLACK 16.11

SILVER RAIL BLACK 16.11
5Pages

Catalog excerpts

Collection Wood ALPI Silver Rail Black

ALPIlignum Silver Rail Technical Features / ALPIlignum Silver Rail / ALPIlignum Silver Rail is a reconstituted wood veneer with aluminium interlayers. Standard dimensions / Poplar based Wood Ayous based Wood Bass based Wood Veneer Nominal Thickness length 2500 mm width 300 mm - 600 mm (only for Wavy option) length 2500 mm width 300 mm - 600 mm (only for Wavy option) length 2500 mm width 300 mm - 600 mm (only for Wavy option)

Open the catalog to page 3

ALPIlignum Silver Rail Technical Features ⁄ ALPIlignum Silver Rail ⁄ Formaldehyde Emission ⁄ In compliance with E1 (analyzed according to EN 717). On request ALPI can supply ALPIlignum Silver Rail with two levels of formaldehyde emissions below the E1 standard: BE - ALPIlignum Silver Rail with a formaldehyde emission lev- el equal to a fraction of the E1 standard. ZeroF - ALPIlignum Silver Rail without added formaldehyde. It is in any event impossible to guarantee a complete absence of formaldehyde in as formaldehyde is a naturally occurring substance in wood. Light Fastness ⁄ ALPIlignum...

Open the catalog to page 4

ALPIlignum Silver Rail User Recommendation ⁄ ALPIlignum Silver Rail ⁄ Veneering ⁄ Glueing With Urea Glues ALPIlignum Silver Rail veneer can be glued on all wood back- ing using urea glues. Different kinds of backing must be tested and assessed on a case-by-case basis. The quantity of glue to be used per square meter depends on the base type and thickness, on the veneer structure (quartered cut, tangential cut, burl, etc.), on its thickness and on the type of pressing. It is generally advisable not to use more than 150 g/m2 of glue at pressures ranging from 1.5 to 5 bars. The recommended...

Open the catalog to page 5

SILVER RAIL BLACK 16.11 5Pages

Catalog excerpts

All ALPI catalogs and technical brochures

SILVER RAIL BLACK 16.11
5Pages