Japanese Cedar 18.46
8Pages

Technical Sheet /ALPIlignum / 18.46 Collection Designer Designer Kengo Kuma ALPI Japanese Cedar Light Gloss Bright Gloss ALPIrobur / 18.46 R Size NA Soft NA Matt NA Pore NA Brushed NA

ALPIlignum Technical Features /ALPIlignum / ALPIlignum is a decorative multilaminar wood veneer compliant with ISO 18775 standard. Poplar based Veneer length 2200-2500 mm width 360 and from 620-800 mm Ayous based Veneer length 2200-2500-2800-3150 mm width 360 and from 620-800 mm Basswood based Veneer length 2500-3150 mm width 360 and from 620-800 mm Width 800 mm on selected items only Please refer to product summary table for specific article dimensions Please note that special dimensions can be manufactured on request Nominal thickness available / Thickness 0.42 - 0.5 - 0.52 -...

ALPIlignum Technical Features ⁄ Formaldehyde Emission ⁄ In compliance with E1 (analyzed according to EN 717). On request ALPI can supply ALPIlignum with two levels of formaldehyde emissions below the E1 standard: BE - ALPIlignum with a formaldehyde emission level equal to a fraction of the E1 standard. ZeroF - ALPIlignum without added formaldehyde. It is in any event impossible to guarantee a complete absence of formaldehyde in ALPIlignum wood veneers as formaldehyde is a naturally-occurring substance in wood. Light Fastness ⁄ ALPIlignum is not a finished product and, therefore its...

ALPIlignum User Recommendation ⁄ Veneering ⁄ Glueing With Urea Glues ALPIlignum veneer can be glued on all wood backing using by means of urea glues. Different kinds of backing must be tested and assessed on a case-by-case basis. The quantity of glue to be used per square meter depends on the base type and thickness, on the veneer structure (quartered cut, tangential cut, burl, etc.), on its thickness and on the type of pressing. It is generally advisable not to use more than 150 g/m² of glue at pressures ranging from 1.5 to 5 bars. The recommended veneering temperature may range between...

ALPIkord Technical Features / ALPIALPikord / Code compliant Code compliant 1.2 % > 80 Taber turns No effect > 2 Grey scale Light Gloss-Bright Gloss / 2500x1250/3050x1300 mm 1.2 % > 100 Taber turns Halo caused by acetone > 2 Grey scale 1.2 % > 100 Taber turns No effect > 2 Grey scale Code compliant Wood Veneer Phenolic Backing

ALPIrobur Technical Features ⁄ Soft-Matt-Pore-Brushed ⁄ Fireproof IMO MED Certificate / Nominal Thickness Code compliant Code compliant Dimensional Variations En 438-2, 17 (2005) Abrasion Resistance* En 438-2, 10 (2005) Stain Resistance En 438-2, 26 (2005) Lightfastness (Xenotest) En 438-2, 27 (2005) Formaldehyde Emission En 717 ALPIlignum Wood Veneer High Resistance Finish Overlay Phenolic Backing

ALPIkord - ALPIrobur User Recommendation ⁄ Application Tips ⁄ To ensure appropriate counterbalancing it is advisable to use the same type of product, although the process may also be conducted using HPL matching the characteristics of the face. In any case, specific production tests should be carried out to evaluate the suitability of the product utilized over time (48/72 hours). Application with Steel Plate Press ⁄ The utmost attention is required when using a steel plate press. It is necessary a perfect cleaning of the plates to avoid dents or damage to the finished surface. Damages to a...