WORKSITE SPIRAL STAIRCASE WITH SIDE EXIT
26Pages

WORKSITE SPIRAL STAIRCASE WITH SIDE EXIT

Escalib MDS | Worksite spiral staircase with side exit

Escalib MDS (safe assembly and disassembly) is a metal spiral staircase with side exit. The triangular step then acts as a landing. Simply arrange Escalib MDS by rotating by a quarter-turn so that one of the steps is aligned with the slab to be served. It is formed from a base, 1 to 8 modules that are easy to stack with a crane and a head guardrail closing the passage (max height 20.10 m). Set-up under collective protection (harness-free) is quick and easy: 4 nuts per module. Each module is equipped with collapsible guardrails, hinged about a non-detachable end. Escalib can be moved using a...

Escalib MDS | Worksite spiral staircase with side exit Easy, secure access All levels are accessible without adap tation. Assembly and disassembly with collective protection The guardrails are built-in (harness-free). Quick installation and movement. Compact footprint. Only 3 different single-block elements. Can be handled with a crane. Compatible with 2- and 3-rail Escalib. Powder-coated paint version available. "HEAD" MODULE (= module + closing guardrail) Collapsible assembly rail. Collapsible guardrail by tilting to allow exit at desired level. Hoisting of complete staircase 2 primary...

Head module Catalogue Number Assembled module Catalogue Number Closing guardrail Catalogue Number

Escalib MDS ESCALIB MDS ACCESSORIES Collar Catalogue Number Slip resistance: 515 daN SLS Mounted on the holes situated 1.50 m from the bottom of the modules Tethering and anchoring equipment Slip resistance: 515 daN SLS Positioned along module risers Use to secure the tower clamp onto a skin Tower clamp Petzl ring Tethering half-collar Catalogue Number Complete tethering rail Used to secure the tower to a skin Has a safety hook Catalogue Number PROCES VERBAL DE VERIFICATION AVANT MISE (OU REMISE) EN SERVICE ESCALIB MDS Assemblage et 1ère mise en service Déplacement Ajout ou suppression...

SPARE PARTS FOR MAINTENANCE Catalogue Number Catalogue Number Catalogue Number Catalogue Number Catalogue Number Catalogue Number Catalogue Number Catalogue Number Catalogue Number MDS flattened straight rail side A MDS flattened curved rail side A MDS guardrail with lock side B MDS sliding rail side B MDS hinged rail side C MDS rail with lock side C Module assembly Catalogue Number Catalogue Number Catalogue Number Lock-end rail assembly Complete M14 spring lock Catalogue Number Threaded clamping plate + pin Bolt-end rail assembly Clamping plate rail side A Catalogue Number Curved rail...

Escalib MDS CONFIGURATIONS Escalib consists of 3 different single-block elements. Description Catalogue Number Composition Number of modules 1 Closing guardrail Maximum height served (m) An information label is stuck onto the modules and bases to define the orientation of Escalib MDS according to the height to be served and repeat the assembly, hoisting, tethering and transport instructions. The triangular steps in corners (0.51 x 1.00 m) serves as landings allowing users to rest and pass each other. - All the sides of the module are secured by guardrails. CAUTION: Maximum height served ≈...

"Head" module: closing guardrail + module Closing guardrail Assembly with H-M16 bolt. The closing guardrail is equipped with foolproof mechanisms to prevent incorrect assembly. Module - he closing guardrail can be mounted on the module prior to delivery T on-site. Module on base: main entrance configuration (side A) Open entrance. Preferred option. Closed entrance

Escalib MDS CONFIGURATION Module on base: secondary entrance configuration (side B) Open entrance Closed entrance

USER GUIDE: HEIGHT COMPOSITION HEIGHT COMPOSITION - ot more than 8 stacked modules. Above N this value, please contact our design office. - users per module, limited to 20 on 8 Escalib MDS. - ake sure that the ground level intended M to receive the Escalib MDS is capable of withstanding the loads. - ethering mandatory for winds above T 72 km/h. - ethering mandatory from 3 modules, T then every 3 modules for winds below 150 km/h The last 4 steps are accessible with the third module. With 2 modules, the height served is limited to 5 metres. Height of slab to be served (m) 5.2 to 5.8 4.6 to...

Escalib MDS USER GUIDE: ASSEMBLY RAIL IN CLOSED POSITION T he assembly rail is placed in the horizontal position under the effect of gravity. This allows secure slinging and installation and removal of a module and the closing guardrail. - Slinging. - Installation or removal of a module. CAUTION The assembly rail cannot act as a substitute for the closing guardrail. - Installation or removal of closing guardrail.

ASSEMBLY RAIL IN OPEN POSITION - ocking on the closing guardrail. L To free the passage, the assembly rail is locked vertically upwards. - On the 1st step of the upper module. Exit at head on side B: extend the guardrail from the slab to the Escalib MDS closing guardrail. - ocking on the step of the upper module. L CAUTION The assembly rail cannot act as a substitute for the closing guardrail. During transportation, return the assembly rail to the horizontal position so as not to exceed a size suitable for road transport. - On the closing guardrail when the exit is at this level.

- ake sure that the ground level intended M to receive the Escalib MDS is capable of withstanding the loads. - eneral handling and stability guidelines G must be adhered to. - he assembly rail cannot act as a subT stitute for the closing guardrail. - it tethers as assembly progresses. F - erform disassembly in the reverse P order of assembly. ress Assembly in prog Access restricted l onne USER GUIDE: ASSEMBLY AND DISASSEMBLY EXAMPLE OF AN ESCALIB MDS WITH 3 MODULES 1 - rient the base according to height of slab to be served (the sides are O indicated on the self-adhesive label). -...

- Fit the module onto the base. - Assemble the 4 risers with M24 screws. - Detach the sling. - otate the assembly rail into the vertical position and lock on the top step. R - Assemble the risers with M24 screws. - Detach the slings. - epeat steps 2, 4 and 5 if required, tethering the Escalib MDS as R assembly progresses. Head module: steps 6 to 8 - osition and bolt the closing guardrail: the assembly rail is in the horiP zontal position.