*myarchiexpo

VerticAL

Product catalog summary

Overview
The VerticAL aluminium formwork system is designed for constructing stringers, substructures, and various types of buildings. It is known for its reliability, robustness, and ability to reduce assembly times and production costs. The system supports both vertical and horizontal panel installations, enhancing its versatility.

Productivity
The formwork is hand-portable with a reinforced aluminium chassis and 15 mm shuttering, available in plywood or Alkus®. The panels are lightweight, averaging 22.50 kg/m², and allow for very fast installation. The system includes various accessories, safety devices, and angle brackets suitable for all site conditions. Vertical reinforcements ensure safe lifting.

Modularity
The system offers increased versatility with panels that can be stacked vertically or horizontally. Panels can be offset due to the peripheral profile, making it ideal for sites with difficult access.

Quality
Production quality is ensured by a fully automated process, from frame cutting to shuttering installation, minimizing non-compliance.

Technical Characteristics
The formwork features a 10 cm aluminium frame supporting a pressure of 60 kN/m². It is available in various dimensions, with standard sizes up to 2 x 3 m. The shuttering is 15 mm thick, and the average weight of aluminium is 22.5 kg/m².

Components and Accessories
The system includes various components such as assembly clamps, safety brackets, prop sockets, and additional metal sheets. These components facilitate fast and effective panel assembly, enhance safety, and allow for precise dimensional adjustments.

Other Components
Additional components include angle brackets, multi-hole panels for post production, windmill sail clamps, and wall stops for creating pillars. These components are designed to meet various site configurations and requirements.

Storage and Transport
VerticAL panels come with storage and transport solutions, including stackable containers with lifting rings and baskets for easy handling. The panels can be lifted and transported using cranes or forklifts, and the baskets are designed for optimal loading onto flatbed lorries.

Contact Information
For more information, contact Alphi at Savoie Hexapole, Actipole 5 - Rue Maurice Herzog, 73420 Viviers-du-Lac, France. Phone: +33 (0)4 79 61 85 90, Email: [email protected].

Catalog excerpts

VERTICAL ALUMINIUM FORMWORK

Open the catalog to page 1

VerticAL | Vertical aluminium formwork The VerticAL formwork panel system is designed for the building of stringers, substructures, industrial and agricultural buildings. Reliable and robust, the system can reduce assembly times on building sites, as well as production costs. The vertical or horizontal panel installation increases the versatility of the VerticAL formwork.

Open the catalog to page 2

VerticAL | Vertical aluminium formwork TECHNICAL CHARACTERISTICS PRODUCTIVITY Hand-portable formwork with reinforced aluminium chassis and 15 mm shuttering (plywood or Alkus®). Lightweight panels convenient to use: average weight 22.50 kg/m2. Very fast installation. Accessories, safety devices, angle brackets, shoring to suit all sites. Vertical reinforcements for lifting in total safety. Reinforced rod passage offset 6 cm from the edge. Ideal for producing stringers MODULARITY Increased versatility: panels fitted on top of each other, vertical or horizontal installation. Panels can be offset...

Open the catalog to page 3

VERTICAL ACCESSORIES *For sale only. Other dimensions available on request. Equipped prop socket S/E hinged prop socket (without pin) The traditional tap-in alternative is available. Safety brackets can be assembled inside the reinforcements using hammer head screws. The tightening assembly clamps mean fast, effective panel assembly. Key tightening allows to add 2 cm compensation, avoids misplaced hammer blows on the frames and reduces noise pollution. Prop socket Prop sockets Additional metal sheet Additional metal sheets VERTICAL ALUMINIUM panels Safety bracket Assembly tap-in clamp Assembly...

Open the catalog to page 4

OTHER COMPONENTS OTHER COMPONENTS ANGLE BRACKETS POST FORMWORK - he fixed or variable angle brackets meet all T site configurations. - Available in several dimensions. T his panel produces your posts simply and effectively from 15 x 15 cm up to 60 x 60 cm, thanks to its built-in rod passages in the frame at 5 cm intervals. Multi-hole panels Windmill sail clamps Windmill sails clamps are used to produce square or rectangular posts with standard panels. 0 Steel formwork tool - o produce square or T rectangular posts. - ections adjusted to the millimetre. S - mm steel shuttering sheet. 5 - ptional...

Open the catalog to page 5

STORAGE ACCESSORIES - erticAL panels have a range of appropriate V baskets to facilitate their storage and transport to the site. - he positioning lugs can store twelve panels T horizontally. The holding bar, compatible with the built-in locks, keeps the panels perfectly positioned during transport. - he panels can be stacked and are fitted with T lifting rings and fork slots to facilitate handling with any type of lifting equipment. Holding panels - dapted to the panel dimensions, the basket A holds them perfectly. - he maximum width of two baskets juxtaposed T is 2.02 m. - deal for loading...

Open the catalog to page 6

VERTICAL ALUMINIUM FORMWORK neWaru - VerticAL EN - October 2019 - Photos : X. VerticAL modular and robust aluminium formwork panels for all geometric combinations.

Open the catalog to page 7

All ALPHI SAS catalogs and technical brochures

Archived catalogs

SECURE HOLD FOR FORMWORK AND DRYING
32 Pages