TopDalle Eco
31Pages

{{requestButtons}}

Catalog excerpts

TopDalle Eco - 1

SLAB FORMWORK COMBINING SAFETY AND THE ENVIRONMENT

Open the catalog to page 1
TopDalle Eco - 2

TopDalle Eco | Slab formwork combining safety and the environment

Open the catalog to page 2
TopDalle Eco - 3

The versatile TopDalle Eco system suits every type of building: offices, housing, residential care homes, correctional facilities, etc. Simple and quick to install, the TopDalle Eco systems offers productivity of 33 m2/person/day at a height of 2.50 m. Developed by Alphi's R&D department, TopDalle Eco formwork is compliant with the decree dated 2004 concerning falls from height and meets the requirements of the NF E 85-014 and NF X 35-109 standards concerning the risks of tripping, slipping and falling objects, as well as manual load handling. Fall from height NF E 85-014 Fall on ground...

Open the catalog to page 3
TopDalle Eco - 4

TopDalle Eco | Slab formwork combining safety and the environment SAFETY Worker safety The work area is secured by full-surface Eco+ panels, preventing falls from height and the risk of tripping, slipping, or falling objects. Ground-based Eco+ panel fitting and removal. With TopPerche Eco, formwork is installed and removed from ground level up to 3 m (no need for rolling safety ladder depending on heights). COMPLIANT WITH THE DECREE OF SEPTEMBER 2004 CONCERNING FALLS FROM HEIGHT AND WITH THE NF E 85-014 AND NF X 35-109 STANDARDS. Increased stability The multi-support areas of the Eco+...

Open the catalog to page 4
TopDalle Eco - 5

Concrete soffit quality Superior quality as per DTU 21 guidelines for concrete floors. Designed to limit CO2 emissions, the Eco+ panel is made of 100% recycled and 100% recyclable aluminium. Nailing on timber insert Plywood (15 mm authorised) secured using nails. The asymmetric insert can adapt to different configurations. Regulations The beams are designed in compliance with the formwork standard NF P 93-322. Cleanliness The shape of the Eco+ panel limits chalking on the vertical wall. Concrete formwork thickness of up to 1.23 m, according to configuration. Short distribution channels The...

Open the catalog to page 5
TopDalle Eco - 6

TopDalle Eco 3 COMPONENTS FOR SIMPLE SHAPES Technical support (ST) with integrated drop-head Technical supports Eco+ panel Integrated drop-head for fast removal (patented system) Base web Hot-dip galvanized Cast iron sleeve Primary beam Theft protection Can be mounted in a drawer 30 mm timber inserts, for nailing on plywood using 40 mm nails Anti-tip safety 33 cm width Theft protection Timer inserts for nailing on plywood using 40 mm nails Coloured tip

Open the catalog to page 6
TopDalle Eco - 7

2 COMPONENTS FOR COMPLEX SHAPES (OPTIONAL) Extendable primary beam From 90 to 110 cm, to adapt to all cell sizes Can be mounted using drawer system Continuous resting of secondary beams on primary beam Extendable secondary corner beam Each secondary corner beam must be associated with the secondary beam of the same size (e.g.: PSE ang 110 with PS 110) Adjustable length imber inserts for T nailing on plywood Modular orientation as close as possible to the concrete skin by rotating the tip Working angles o

Open the catalog to page 7
TopDalle Eco - 8

TopDalle Eco USE CALCULATION CHARTS Beams Value given for superior quality as per DTU 21 guidelines for concrete floors, accounting for the site load (2.5 kN/m2). Éco+ panel Éco+ panel Éco+ panel PP Primary beam Eco+ ST (32 kN) and beam limit Load on prop greater than 32  (zone requiring spekN cific study by Alphi design office) Beam limit with 10 cm spacing Éco+ panel Secondary panel PSE ang Secondary corner beam PPE Extendable primary beam For PPE beams, the values are: - 0.36 m for the 110 frame, - 0.28 m for the 150 frame, - 0.24 m for the 180 frame. ST technical supports with...

Open the catalog to page 8
TopDalle Eco - 9

TOPDALLE ECO ACCESSORIES Mesh* Weight (kg) Primary adapter Weight (kg) Prop adapter Prop adapter Alphi formwork adapters* Primary adapter Galvanized post* The wire mesh is galvanized, with polyester powder coating * ompliant with EN 13374 C standard Non-tilt safety fork (FSAB) Installation from ground level Maximum allowable load (kN) Unit weight bracket (kg) Maximum allowable load (kN) Unit weight FSAB (kg) Electrogalvanized insulated head Bracket: butterfly fastening nut FSAB: hammer head screw Work from ground level Risk of falls from height eliminated Compatible with Eco

Open the catalog to page 9
TopDalle Eco - 10

TopDalle Eco TOPDALLE ECO ACCESSORIES Leborgne tools Nanovib® range Tools suitable for fitting and removing Alphi formwork: hammers, hammer holder, prop key Vibration and noise reduction distributes Click here to view details of Leborgne Tools Vertical storage rack Galvanized rack on wheels Galvanized handling rack Click here to view details of racks TransEtais Housing Easier prop handling Makes it possible to pass through door openings Click here to view details of TransEtais Housing Plywood cutting support Rolling safety ladder For sale only Circular saw kit and electrical extension...

Open the catalog to page 10
TopDalle Eco - 11

AlphiSafe is a collective protection system for formwork and slab edges. The technical innovations in the system allow safe installation and automatic locking. Robust AlphiSafe is certified by Ginger CEBTP, as per the EN 13374 standard of July 2013, as class A and B for some components. AlphiSafe is distinguished by its height of 1.30 m, which is above the minimum height of 1.00 m set by the standard, and protects traditional slab formwork up to 30 cm thick. ALPHISAFE COLLECTIVE PROTECTION The mesh is locked at the top by the anti-lifting pin and locked in rotation at the base. Installation...

Open the catalog to page 11
TopDalle Eco - 12

TopDalle Eco CLAMPING Depending on the configuration, stabilisation may be recommended. Contact our Design Office to validate the solution. The different systems are featured below. Skin clamp Skin clamp - Skin clamp + tube system. - et up the stabilisation of the first components. S Once stabilised, the tripods can be removed. Girder clamp Girder clamp Tubes and collars - Girder clamp + tube system. - et up the stabilisation of the first components. S Once stabilised, the tripods can be removed. Prop clamp - rop clamp to be driven into the wall with P concrete screws. - his clamp can be...

Open the catalog to page 12
TopDalle Eco - 13

- o use our products safely, please observe T the regulations in force in each country. -T he elements and set-ups presented in this brochure match the characteristics of the equipment on the date of publication of the document. There might have been some changes since then. - The use of our systems in combination with systems from other manufacturers may involve some risk, and would require special inspection. -B efore starting to set up, remember to secure the area. ress Assembly in prog Access restricted l onne Click here or scan the QR code to view the video of the procedure....

Open the catalog to page 13

All ALPHI SAS catalogs and technical brochures

  1. VerticAL

    7 Pages

  2. Dalphi

    30 Pages

  3. MaxiDalle

    32 Pages

  4. TopDalle

    31 Pages