THE SHORING TOWER WITH SAFETY FEATURES
14Pages

{{requestButtons}}

Catalog excerpts

THE SHORING TOWER WITH SAFETY FEATURES - 1

THE SHORING TOWER WITH SAFETY FEATURES

Open the catalog to page 1
THE SHORING TOWER WITH SAFETY FEATURES - 2

A120 tower | The shoring tower with safety features

Open the catalog to page 2
THE SHORING TOWER WITH SAFETY FEATURES - 3

Alphi shoring towers satisfy the needs of all types of projects: the A120 tower is an effective solution for user safety; low towers are available for specific requirements. As recommended in the CRAMIF NT24 guidelines, the A120 tower can be assembled and disassembled in complete safety, limiting the risks of falls from height. Site: La Cartoucherie Car park Client: Eiffage Location: Toulouse

Open the catalog to page 3
THE SHORING TOWER WITH SAFETY FEATURES - 4

A120 tower | The shoring tower with safety features COMPLIANT WITH THE GUIDELINES OF CRAMIF TECHNICAL REPORT NO. 24 Safe assembly from the lower level. Built-in safety features. No connectors between ladder frames. Compliant with the guidelines of CRAMIF technical report No. 24 This technical report concerns ladder shoring towers and other shoring towers from 2.50 to 6 m tall. Its aim is to improve this equipment and therefore also user safety. The guidelines concern limiting: falls from heights, repetitive strain injury, falls at ground level, towers collapsing or tipping, handling a

Open the catalog to page 4
THE SHORING TOWER WITH SAFETY FEATURES - 5

ADAPTABILITY The A120 tower exists in three sizes: 120x130 - 120x160 120x220 cm. It can be used with TopDalle formwork, with Alto formwork decks, and with the whole range of Alphi beams (AL200, AL100, H20). PERFORMANCE Allowable load of 30 kN/foot. Can be handled with a cran

Open the catalog to page 5
THE SHORING TOWER WITH SAFETY FEATURES - 6

A120 tower COMPONENTS Guardrail Central structure Deck without trapdoor Deck with trapdoor Access guardrail Aluminium and timber floor

Open the catalog to page 6
THE SHORING TOWER WITH SAFETY FEATURES - 7

Adjustable base Intermediate base jack Base plate Intermediate head jack

Open the catalog to page 7
THE SHORING TOWER WITH SAFETY FEATURES - 8

A120 tower A120 TOWER ACCESSORIES Clinch-fit beam guardrail Fixed guardrail Component with hook Skin clamp Offset component with hook Tower clamp Stabilising clamp for use with 48 mm tube and collars Dywidag form panel hole clamp Used to secure the tower to a skin Has a safety hook Shifting trolley with rack The loop is used either to stabilise a riser, or to receive a tube for holding multiple risers Can be used to move towers witho

Open the catalog to page 8
THE SHORING TOWER WITH SAFETY FEATURES - 9

SAFE ASSEMBLY AND LINKING 1 - djust the adjustable bases to the desired height. A barreau - oin the adjustable bases to the 1.50 m ladder. J - ink the 1.50 m ladders to the access guardrail or cross-members. L - osition a deck with trapdoor on the 2nd rung of the 1.50 m ladder. P - limb onto the deck and position two 1 m ladders. C - it the two guardrails. F - osition a deck without trapdoor on the 6th rung of the 1.50 m ladder. P - ssemble the lower deck at the same level as the deck without trapdoor A to create a work surface. - osition the two 1 m ladders and fit the two guardrails. P -...

Open the catalog to page 9
THE SHORING TOWER WITH SAFETY FEATURES - 10

2e barreau 2e barreau 2e barreau SAFE ASSEMBLY AND LINKING A guardrails. - ssemble the deck without trapdoor C on the final rung of the 3rd ladder. A 6e barreau - eassemble the deck C at the same level as the deck D to create a R work surface. - ssemble the 2-inlet adjustable forks and the beams to finalise the A tower assembly. - rom 5 metres and above, towers must be cross-braced by a planar F linkage every 3 metres in height, with Ø 48.3 tubes and fixed Ø 49/60 scaffolding collars. A and D: decks with trapdoor. B and C: decks without trapdoor. - limb onto the deck C and position the next...

Open the catalog to page 10
THE SHORING TOWER WITH SAFETY FEATURES - 11

COMPOSITION CHARTS Towers with adjustable bases at the bottom and adjustable forks at the top Height at bottom of fork min. - max. (cm) Adjustable base Adjustable fork ½ plank with trapdoor Weight (kg) Weight of a basic steel tower measuring 1.20 x 1.60 m Height at bottom of fork min. - max. (cm) Towers with base plates at the bottom and adjustable forks at the top Adjustable base Adjustable fork ½ plank with trapdoor Weight (kg) Weight of a basic steel tower measuring 1.20 x 1.60 m

Open the catalog to page 11
THE SHORING TOWER WITH SAFETY FEATURES - 12

A120 tower EFFECTIVE DIMENSIONS: EXAMPLES OF CONFIGURATION TOWERS WITH ADJUSTABLE BASES AT THE BOTTOM AND ADJUSTABLE FORKS AT THE TOP Adjustable base Adjustable fork TOWERS WITH BASE PLATES AT THE BOTTOM AND ADJUSTABLE FORKS AT THE TOP Adjustable fork Base plate Adjustable fork

Open the catalog to page 12
THE SHORING TOWER WITH SAFETY FEATURES - 13

Adjustable slide Adjustable fork Base plate Adjustable slide Adjustable fork Adjustable base LOW TOWERS WITH BASE PLATES AT THE BOTTOM AND ADJUSTABLE FORKS AND SLIDES AT THE TOP LOW TOWERS WITH ADJUSTABLE BASES AT THE BOTTOM AND ADJUSTABLE FORKS AND SLIDES AT THE TOP LOW TOWERS WITH BASE PLATES AT THE BOTTOM AND ADJUSTABLE FORKS AT THE TOP Adjustable fork Base plate NB: f access to the inside of the tower is necessary, the I lower part can be equipped with access points. Dimension (cm) 1

Open the catalog to page 13
THE SHORING TOWER WITH SAFETY FEATURES - 14

ALPHI, THE FRENCH SHORING SPECIALIST neWaru - A120 Tower EN - September 2018 - PDF version - Photos: Alphi, Marie-Hélène Carcanague, Joël Damase, neWaru The A120 tower is a shoring tower that can be assembled and disassembled in complete safety. High-performance, it allows a load of 3 tonnes/foot.

Open the catalog to page 14

All ALPHI SAS catalogs and technical brochures

  1. VerticAL

    7 Pages

  2. Dalphi

    30 Pages

  3. MaxiDalle

    32 Pages

  4. TopDalle Eco

    31 Pages

  5. TopDalle

    31 Pages