SECURE HOLD FOR FORMWORK AND DRYING
15Pages

{{requestButtons}}

Catalog excerpts

SECURE HOLD FOR FORMWORK AND DRYING - 1

SECURE HOLD FOR FORMWORK AND DRYING

Open the catalog to page 1
SECURE HOLD FOR FORMWORK AND DRYING - 3

European standard props comply with standard EN 1065.

Open the catalog to page 3
SECURE HOLD FOR FORMWORK AND DRYING - 4

European standard props | A range of props compliant with standard EN

Open the catalog to page 4
SECURE HOLD FOR FORMWORK AND DRYING - 5

The metal prop range offered by Alphi is used on all construction sites. Available in four classes, props compliant with the EN 1065 and EN P 1065-221 standards offer the best performances in terms of quality and strength. NEW: the NEVO props have numbers engraved on the inner tube which simplifies the adjustment of the props to the right height. The companion’s work, thus facilitated, allows a proven productivity gain. For long props, Alphi has designed the TransÉtais trolley to facilitate the work of form fitters. For added safety, the following options are available on props compliant...

Open the catalog to page 5
SECURE HOLD FOR FORMWORK AND DRYING - 6

European standard props NEVO - CLASS D30 Load table for Nevo - Class D30 props used for formwork of drying Trapezoidal double-start threading facilitating the strike-down (8 mm thread) Anti-dropout system (as per EN 1065) 100 mm hand guard Captive pin Engraving of year of manufacture (example: 19 for 2019) Slide with numbered holes Epoxy paint nut Sendzimir type material

Open the catalog to page 6
SECURE HOLD FOR FORMWORK AND DRYING - 7

Load table for Nevo - Class D35 props used for formwork of drying Trapezoidal double-start threading facilitating the strike-down (8 mm thread) Anti-dropout system (as per EN 1065) 100 mm hand guard Captive pin Engraving of year of manufacture (example: 19 for 2019) Slide with numbered holes Epoxy paint nut Sendzimir type material

Open the catalog to page 7
SECURE HOLD FOR FORMWORK AND DRYING - 8

European standard props | A range of standardised metal props NEVO - CLASS D40 Load table for Nevo - Class D40 props used for formwork of drying Trapezoidal double-start threading facilitating the strike-down (8 mm thread) Anti-dropout system (as per EN 1065) 100 mm hand guard Captive pin Engraving of year of manufacture (example: 19 for 2019) Slide with numbered holes Epoxy paint nut Sendzimir type material

Open the catalog to page 8
SECURE HOLD FOR FORMWORK AND DRYING - 9

Load table for Nevo - Class D50 props used for formwork of drying Trapezoidal double-start threading facilitating the strike-down (8 mm thread) Anti-dropout system (as per EN 1065) 100 mm hand guard Captive pin Engraving of year of manufacture (example: 19 for 2019) Slide with numbered holes Epoxy paint nut Sendzimir type material

Open the catalog to page 9
SECURE HOLD FOR FORMWORK AND DRYING - 10

European standard props PROP ACCESSORIES Collapsible galvanised tripod Girder clamp Skin clamp For use with timber beams and AL200 The tube is inserted into the prop used for cladding Prop clamp Stabilising clamp for use with 48 mm tube and collars Dywidag form panel hole clamp The 45°-oriented rear plate allows fastening after positioning the prop The loop is used either to stabilise a prop, or to receive a tube for holding multiple pr

Open the catalog to page 10
SECURE HOLD FOR FORMWORK AND DRYING - 11

PROP ACCESSORIES Nanovib® range Leborgne tools Tools suitable for fitting and removing Alphi formwork: hammers, hammer holder, prop key Vibration and noise reduction Click here to view details of Leborgne Tools Galvanised handling rack Vertical storage rack Galvanised rack on wheels Click here to view details of racks TransÉtais Logement Easier prop handling Makes it possible to pass through door openings Click here to view details of TransÉtais Logem

Open the catalog to page 11
SECURE HOLD FOR FORMWORK AND DRYING - 12

European standard props WARNING - o use our products safely, please observe T the regulations in force in each country. -T he elements and set-ups presented in this brochure match the characteristics of the equipment on the date of publication of the document. There might have been some changes since then. - The use of our systems in combination with systems from other manufacturers may involve some risk, and would require special inspection. -B efore starting to set up, remember to secure the area. ress Assembly in prog Access restricted l onne PREPARATORY STAGE Reception of equipment on...

Open the catalog to page 12
SECURE HOLD FOR FORMWORK AND DRYING - 13

- Bearing surfaces must be flat and stable. - Ensure that the prop is vertical. - he pin must be correctly inserted and rest on the nut. T

Open the catalog to page 13
SECURE HOLD FOR FORMWORK AND DRYING - 14

European standard props HANDLING 1 - o not store the props vertically. D - o not strike the threading with any tool liable to damage it. D - o not throw props. Stow them in the suitable racks and move them D using a crane.

Open the catalog to page 14
SECURE HOLD FOR FORMWORK AND DRYING - 15

ALPHI, THE FRENCH SHORING SPECIALIST neWaru - Props EN - February 2020 - PDF version - Photos: Alphi, neWaru, photo GPO, X Whether for formwork or drying, our props are suited to all uses.

Open the catalog to page 15

All ALPHI SAS catalogs and technical brochures

  1. VerticAL

    7 Pages

  2. Dalphi

    30 Pages

  3. MaxiDalle

    32 Pages

  4. TopDalle Eco

    31 Pages

  5. TopDalle

    31 Pages