- Catalogs
- Alphatronics
- Automatic barrier Torqus Medius
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
Automatic barrier Torqus Medius
Automatic barrier Torqus Medius
- Material: Stainless steel support with bichromated steel housing (2.5 mm thickness) and stainless steel base (3 mm thickness).
- Drive Technology: 230 V electrical torque motor with sinus-lift system.
- Barrier Boom Length: Available in octagonal or round shapes, ranging from 2.8 m to 5.8 m.
- Passage Width: Ranges from 2.5 m to 5.5 m.
- Opening/Closing Time: Between 2.5 to 4.0 seconds or 4.0 to 5.0 seconds depending on the model.
- Temperature Range: Operates between -40°C to +45°C.
- Protection Degree: IP54.
- Power Specifications: 230 VAC mono 1-f, Max. 70 W or 60 W, 50 Hz frequency, 0.4 A nominal current.
- Torque: 18 Nm or 26 Nm with reduction ratios of 1/45 or 1/65.
- Weight: 75 kg excluding barrier arm; barrier boom weights vary by length and shape.
- MCBF: 5,000,000 cycles with normal maintenance.
- Standard Colors: Powder coating RAL 2000 or RAL 9006.
- Warranty: 2 years.
- Articulated barrier boom, pendulum support, electromagnetic barrier arm support, bottom skirt, and fixed barrier arm support available for various lengths.
- Click-out system for barrier arm available for certain lengths.
- Barrier arm support is necessary for boom lengths starting from 4000 mm.
- Depth of foundation should be 700 mm.
- Round barrier boom recommended for areas with strong crosswinds (> 120 km/h) due to its aerodynamic shape.
- RS485 controller for setup and configuration, adjustable to customer needs.
- Easy control and diagnostics over IP or RS485 network.
- Integration possibility with Software Development Kit.
- Low maintenance costs.
Catalog excerpts
14-06-2017 • The information given is subject to change without any notice.
Open the catalog to page 1
Flexible 3/4’’ to bring the loop into the barrier Maximum passage width: 5500 mm concrete / asphalt Barrier arm support necessary for boom lenghts starting from 4000 mm Reinforced concrete cable entry For installation conditions where the barrier is exposed to strong cross winds (> 120 km/h), Alphatronics offers a round barrier boom. The round shape is aerodynamic and less susceptible to wind gusts and is recommended near sea or in the mountains. 14-06-2017 • The information given is subject to change without any notice. Copyright Alphatronics
Open the catalog to page 2All Alphatronics catalogs and technical brochures
SMARTLINE3 Pages
CUBELINE2 Pages
DBK Automatic barrier8 Pages
Columns and kiosks2 Pages
ProXat-502 Pages
AT-Control Board1 Page
AT-Button1 Page
IF-60001 Page
Remote control1 Page
channel transmitter3 Pages
Alphatronics solutions guide49 Pages
Catálogo Alphatronics20 Pages
OctoPhone intercom4 Pages
RFID-reader PL-102 Pages
RFID reader ProXat-101 Page
RFID-reader ProXat-502 Pages
RFID reader – QuadraLine2 Pages
Motorized card reader2 Pages
Smart card reader2 Pages
Long distance reader UHF2 Pages
Universal barcode scanner2 Pages
Barcode scanner2 Pages
Numerical keypad2 Pages
ManuBar Manual barrier1 Page
Signalization column6 Pages
Prefab galvanized sockets3 Pages
LED traffic signal6 Pages
Barrier arm signalization6 Pages
Support posts6 Pages
Photocell security6 Pages
Turnstile Turni-Q Linus2 Pages
Camera Column1 Page
- Public space bollard
- Metal bollard
- Door intercom
- Metal barrier
- Public space barrier
- Industrial display panel
- Outdoor bollard
- Security camera
- Pole
- Industrial turnstile
- Commercial turnstile
- Metal display panel
- Surface-mounted security camera
- Metal pole
- Metal door intercom
- High bollard
- Outdoor security camera
- Access control bollard
- Parking lot bollard