BSKL-90
6Pages

Short segmented bends with gaskets Description Segmented bends are designed for spiral coiled ducts. They are made of 4 segments; the bends in diameters of DN 1120 mm and greater are made of 5 segments. The segments are fastened by hemming and seaming. The inside surface of the hemmed seams is sealed, and as a result of the double EPDM gaskets, this solution provides air tightness class D according to EN 12237 for ventilation and heat recuperation systems. The bending radius is ca. 0.6D, which helps installing the ductwork under a suspended ceiling with a limited clearance and reduces the segment bend pricing. BSKFL-90 bends with a single female end are available on request. Available materials — Product code example BSKL-... -90 — galvanized steel sheet BSKL-K-... -90 — 1.4301/304 stainless steel sheet BSKL-K-... -90-316L — 1.4404/316L stainless steel sheet, molybdenum-enriched BSKL-A-... -90 — AW-1050A H24 aluminium sheet BSKL-CU-... -90 — M1E z4 copper sheet Product code example Product code: BSKL - aaa - 90 Round ducts and fittings ALNOR® ventilation systems is a registered trademark protected by a technical patent. All modification rights reserved.

Short segmented bends with gaskets Dimensions Description Segmented bends are designed for building ventilation systems based on SPIRAL ducts and plain ducts. The inside surface of the hemmed seams is sealed, and as a result of the double EPDM gaskets, this solution provides air tightness class D according to EN 12237 for ventilation and recuperation systems. The piece is connected with a duct by inserting one into the other. The bending radius has been reduced to 0.6D which helps installing the ductwork under a suspended ceiling with a limited clearance and reduces the segment bend...

Short segmented bends with gaskets Description Segmented bends are designed for spiral coiled ducts. The inside surface of the hemmed seams is sealed, and as a result of the double EPDM gaskets, this solution provides air tightness class D according to EN 12237 for ventilation and heat recuperation systems. The bending radius is ca. 0.6D, which helps installing the ductwork under a suspended ceiling with a limited clearance and reduces the segment bend pricing. Bends with a single female end are available on request. Available materials — Product code example BSKL-... -45 — galvanized steel...

Short bends with gaskets Dimensions Description Segmented bends are designed for building ventilation systems based on SPIRAL ducts made of galvanized steel sheet, stainless steel sheet or aluminium sheet. The inside surface of the hemmed seams is sealed, and as a result of the double EPDM gaskets, this solution provides air tightness class D according to EN 12237 for ventilation and recuperation systems. The piece is connected with a duct by inserting one into the other. The bending radius has been reduced to 0.6D which helps installing the ductwork under a suspended ceiling with a limited...

Short segmented bends with gaskets Description Segmented bends are designed for building ventilation systems based on SPIRAL ducts made of galvanized steel sheet, stainless steel sheet or aluminium sheet. The inside surface of the hemmed seams is sealed, and as a result of the double EPDM gaskets, this solution provides air tightness class D according to EN 12237 for ventilation and recuperation systems. The piece is connected with a duct by inserting one into the other. The bending radius has been reduced to 0.6D which helps installing the ductwork under a suspended ceiling with a limited...

Technical specifications for 90˚ pressed and segmented bends Technical specifications Flow chart for BSKL-90/BSK-90 Dimensions (mm) Volumetric flow rate q Volumetric flow rate q Volumetric flow rate q Volumetric flow rate q Flow chart for BSDL-90/BSD-90 Dimensions (mm) Volumetric flow rate q Round ducts and fittings Volumetric flow rate q ALNOR® ventilation systems is a registered trademark protected by a technical patent. All modification rights reserved.