1. Catalogs
  2. Almeco Group
  3. LIGHTING vegagreen
video corpo

LIGHTING vegagreen

LIGHTING vegagreen

LIGHTING vegagreen

Product catalog summary
Introduction
This document discusses a high reflectance material developed for horticultural applications, specifically for use in lamp reflectors in greenhouse lighting. This material is a modified version of a standard material used in lighting applications, with optical properties tailored for horticultural use.
Light Requirements for Plants
Plants require light wavelengths different from those most visible to the human eye. Photosynthesis, crucial for plant growth, is most efficient with light in the red spectrum (600-700 nm), although blue light also contributes to growth. High Pressure Sodium (HPS) lamps and Metal Halide lamps are preferred for greenhouse use due to their high irradiation power, emitting light primarily in the orange and red spectrum.
Material Properties
The newly developed material combines commercial and natural plant demands, optimizing spectral reflectance for photosynthesis. It maintains high reflectance in the blue zone while shifting maximum reflectance to the orange and red zones. The material's coating parameters are adjusted to enhance these properties.
Product Performance
  • Coating adhesion: No loss of adhesion in cross hatch test (EN ISO 2409).
  • Bend performance: No spalling of coating at 0.5mm bend radius.
  • Reverse impact test: No spalling of coating.
  • Mechanical properties: Tensile strength of 140-180 MPa, proof stress of 130-170 MPa, elongation ≥ 2%.
  • Total Reflectance: > 95% (DIN 5036-3, ASMT E 1651).
  • Specular Reflectance: > 86% at 60° (ISO 7668).
  • Humidity resistance: No change in reflectance after 100h at 40°C.
Product Characteristics
  • Base material: Pre-anodized aluminium, 99.85% purity.
  • Specification: UNI-EN 573: 3: 96, nominal temper H18.
  • Reflection coat: PVD coated multi-layer reflection stack.
Availability
The material is available in sheets or coils with a maximum width of 1,250mm and thickness ranging from 0.3 to 0.8mm.
Coating System
The coating system includes protective and reflective layers, a PVD aluminium layer, a bonding layer, and an anodized aluminium substrate. A diagram illustrates the modified spectral reflectance function of the material compared to standard mirror materials.
Certifications
The product is certified under ISO 9001:2008, ISO 14001:2004, and BS OHSAS:2007, with regular voluntary monitoring by DEKRA Certification.
See more

Catalog excerpts

LIGHTING vegagreen-1

Horticultural applications

 Open the catalog to page 1
LIGHTING vegagreen-2

is a specially developed high reflectance material for use in horticultural applications, such as lamp reflectors for greenhouse lighting. material, which is already is a modified version of the standard and well proven extensively used in lighting applications both indoor and outdoor. The physical and chemical , but optical properties have been specially tuned to suit this different application. Efficiency of The light required by plants differs slightly from that used by the human eyes, which are most photosynthesis sensitive to the green to yellow range of the spectrum (about 550 nm). In contrast,...

 Open the catalog to page 2
LIGHTING vegagreen-3

material combines the growers‘ commercial demands with the Coating system natural demands of the plants to give an ideal solution for efficient growth. The coating parameters of the layer system are redefined (see below) to provide a strong shift of the maximum spectral reflectance to the orange and red zones most important for photosynthesis while maintaining high reflectance in the significant blue zone. The higher reflectance at over 600nm may cause the product to have a reddish colour. 100 PROTECTIVE AND REFLECTIVE LAYERS BONDING LAYER 95 90 vegagreen vegaSP195 High reflectance material ANODIZED...

 Open the catalog to page 3
LIGHTING vegagreen-4

Milan, Italy - Bernburg, Germany Goncelin, France - Atlanta, USA - Shenzhen, China ISO 9001:2008 ISO 14001:2004 BS OHSAS:2007 Regelmäßige freiwillige Überwachung KR A Almeco Group - Via della Liberazione 15 20098 San Giuliano M.se (Mi) - Italy Ph. +39.02.988963.1 - Fax +39.02.988963.99 [email protected] - www.almecogroup.com

 Open the catalog to page 4

Archived catalogs

  1. vegaflex

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.