SCHOOL BENCH 280 Bench fixed to the floor. Sidearms made of oval-shaped metal tube. The top part is finished with an injected plastic component. The foot is made of stamp aluminium, and finished with an injected plastic cap. A steel bar of rectangular section is fitted between sidearms. This element is used to brace the whole set and, in turn, is where the seat bracket is fixed. The seat bracket is an injected metal component. A double spring system (placed within the same piece) allows the seat pan to fold. A magazine rack is fixed in this steel bar, which is made of steel rod finished with epoxy powder coating, 100 micron, shade to be chosen by the customer. Seat made of MDF, 14mm thick, bent moulded and finished with stratified surface, shade to be chosen by the customer. Backrest is made of bent perforated steel plate, finished with epoxy powder coating, shade to be chosen by the customer. The component is fixed to sidearms by means of specific hardware and security nuts. The working surface is made of MDF, 14mm thick, finished with stratified surface, shade to be chosen by the customer. It can be fixed (continuous) or foldable by means of s rail system. This system is made of die-cast aluminium finished with epoxy powder coating, black or silver colour.