DESIGN, DECO, IN LINE Axial fans
12Pages

Residential ventilation Selection guide H Design ^b Deco h In Line ^b Deco Design installation ^b In Line installation

SELECTION GUIDE Residential ventilation 4) 5 (A 4) Humidity detection Ideal for bathroom/ shower Occupancy detection Ceiling or wall Surface of room to ventilate or diameter of fan

Compliance • CE electrical safety. • Ng'WEEE recycling. Advantages • Ultra-flat design. • Silent from 26 dB(A). • Very low power consumption : from 5.6 W. • Available with occupancy detection. • Exists in 0 100, 125 and 150 mm V___J FIELD OF APPLICATION • Intermittent ventilation of a room. • Forced and intermittent air exhaust. DESCRIPTION • 3 diameters (mm): 100, 125 and 150. • Materials: outside wall terminal and body made of ABS. • Silent motor. • Removable backdraft damper at back of fan unit. • 4 operating modes: - Manual. - T = timer switch. - H = humidity detection (with timer...

DECO Compliance • CE electrical safety. • Ng'WEEE recycling. Advantages • Aesthetic and discreet. • Silent from 26 dB(A). • Very low power consumption : from 5.6 W. • White or aluminium finish. V_/ FIELD OF APPLICATION • Intermittent ventilation of a room. • Forced and intermittent air exhaust. DESCRIPTION • 2 diameters (mm): 100 and 125 • Material: ABS body, ABS grille with aluminium trim (for aluminium finish). • Silent motor. • Removable backdraft damper at back of fan unit. • White colour or aluminium finish. • 3 operating modes: - Manual. - T = timer switch. - H = humidity detection...

• CE electrical safety. • Ng'WEEE recycling. Avantages • Silent. • Air exhaust or air supply. • No fan in the room (fitted in the duct). FIELD OF APPLICATION • Intermittent ventilation of a room. • Used for exhaust or air supply. • Forced and intermittent operation. DESCRIPTION • 3 diameters (mm): 100, 125 and 150. • Material: ABS. • Silent motor. • Manual operation. • Supplied in cardboard box.

Axial fans DESIGN - DECO / DECO ALU INSTALLATION 1- Installation 2- Removable backdraft damper • onnection diameter: C Ø 100/125/150 mm (depending on model). • Fitted using 4 screws (supplied). • Wall or ceiling-mounted (fastening screws and plugs supplied). • Maximum temperature of exhaust air: 40°C 3- Wall or ceiling installation N Le produit doit être raccordé à un interrupteur (non fourni) N Le produit doitLe produit doit être raccordé à un(non fourni) (non fourni) être raccordé à un interrupteur interrupteur Le produit doit être raccordé à un Pour bien commencer... interrupteur (non...

Axial fans DESIGN - DECO / DECO ALU 5- Electrical connection and operation 1• Manual operation Immediate On/Off control using switch S. DECO 2 • Timed operation The extractor fan is activated using the switch S. Once turned off, the fan continues to operate for the time specified on the timer, between 2 and 30 minutes. DECO T Work with mains power off. Switch S not supplied.

Axial fans DESIGN - DECO / DECO ALU INSTALLATION 5- Electrical connection and operation (cont.) 3• umidity-controlled operation H DECO H The axial fan is activated using the switch S or when the humidity level H, pre-set between 60% and 90%, is exceeded. Once the fan is turned off or when the humidity level drops below the threshold, it continues to operate for the time specified on the timer (between 2 and 30 minutes). 4• Occupancy detection operation DESIGN P The fan is activated when movement of a person is detected within a radius of 1 to 4 m, within an angle of 100° horizontal to the...

Axial fans DESIGN - DECO / DECO ALU 6- Fresh air intake • equires an air inlet terminal (with air R passage S) or a door undercut (height H). Ø 7- Authorised installation locations • Prohibited in area 1. 8- Maintenance Work with mains power off. Clean regularly the fan grille with soapy water. Clean the fan unit using a soft damp cloth. Carefully wipe dry all surfaces. Do not submerge the unit in water.

IN LINE INSTALLATION 1- Installation 2- Installation on wall or ceiling Installation inside a duct. Maximum temperature of exhaust air: 40 °C Requires an air inlet terminal or door undercut for correct ventilation of the room. 4- Electrical connection and operation Manual operation Immediate On/Off control using switch S. A Work with mains power off. Switch S not supplied.

IN LINE6- Fresh air intake • Requires an air inlet terminal (with air passage S) or a door undercut (height H). 8- Maintenance A Work with Clean regularly the terminal with soapy water. Clean the fan unit using a soft damp cloth. mains power Carefully wipe dry all surfaces. off. Do not submerge the unit in water.

Residential ventilation DESIGN, DECO, IN LINE Axial fans Fields of application • Forced and intermittent air exhaust. Installation • Ideal for renovating existing buildings. • Can be installed on a wall, ceiling or in a duct. Advantages • Silent: from 26 dB(A). • Very low power consumption. • Easy to install and use. • Multiple operating modes. Extracteurs_Tech_Corp_Gb_1 - Aldes reserves the right to make changes to its products due to technical developments. - RCS Lyon 956 506 828