APPLICATION PROCEDURE HYGROSMART®-ADHESIVE ULTRA-2K is highly deformable, improved, fast-setting (F) cementitious (C) adhesive, slip resistant (T) and with extended open time (E), complying with the requirements of an adhesive classified as C2FTE. RECOMMENDED FOR Bonding to internal and external walls and floors of all types and sizes of ceramic tiles, natural stones and artificial materials. APPLICATIONS -Laying ceramic and stone floor coverings which are subject to intense traffic. -Laying tiles on deformable substrates: marine plywood, wooden agglomerates, old wooden floors, etc. -Quick laying or repair of tiled finishes in places such as swimming pools, refrigeration units, industrial plants. -Laying even large-sized ceramic and stone tiles on facades, balconies, terraces -Laying tiles in areas subject to high mechanical stresses and vibration -Laying tiles on concrete substrates and pre-cast walls. Substrate Preparation: Remove oil, grease and wax contaminants, cement laitance, loose particles. Fill surface irregularities with the necessary product. Mix 25 kg of component A with 6.25 kg of component B. It is best to use a low-speed mechanical mixer to obtain a smooth, homogenous paste. Apply HYGROSMART®-ADHESIVE ULTRA-2K on the substrate with a notched trowel. Use a trowel which guarantees that the adhesive is spread well on the back of the tile. To achieve a good bond, first spread a thin layer of HYGROSMART®-ADHESIVE ULTRA-2K on the substrate using the smooth side of the trowel, and then immediately apply another layer to the thickness required with a notched trowel according to the type and size of the tile. The tiles must be laid by pressing them down firmly to ensure good contact with the adhesive. Under normal climatic conditions, the open time of HYGROSMART®-ADHESIVE ULTRA-2K is approximately 30 minutes. Surfaces tiled with HYGROSMART®-ADHESIVE ULTRA-2K must not be washed down or exposed to rain for at Certified quality, environmental and occupational health & safety management systems: ISO 9001/14001 & ISO 45001.

least 3-4 hours and must be protected from strong, direct sunlight for at least 12 hours. CONSUMPTION Mosaics and small-sized tiles (trowel No.4): 2.5-3 kg/m2. Normal-sized tiles (trowel No. 5): 3.5-4 kg/m2 Large tiles and external floors (trowel No. 6): 5-6 kg/m2 Uneven back faces and substrates, natural stone (trowel No. 10): 8 kg/m2 or more. Brushes and tools can be cleaned with water. Dried product cannot be cleaned with water and can be removed only by mechanical means. Comp. A: 25kg, Comp. B:6.25kg Colour: grey The product can be kept for a minimum of 12 months in the original unopened...