AGLAS SANITARY ACRYLIC
12Pages

AGLAS SAN - sanitary ware cast acrylic sheets

Aglas San - Sanitary Ware Cast Acrylic Sheets | Product Types | 4 kColour Range | 4 Standard Sizes | 4 Standard Thicknesses | 5 Technical Properties | 5 Processing | 6 Thermoforming Instructions: Aglas San | 7 S Aglas San Easy Shapin Chemical Resistance | 1 Protection And Packaging Quality Control | 11 Maintenance And Cleanin

Aglas SAN is a cast acrylic sheet specially developed for sanitary ware applications. Its cross-linked nature and specific chemical structure enables manufacturing of high quality bathtubs, shower trays and other sanitary appliances. It offers unique combination of characteristics including aestethic, durability and very smooth surface finish. It is warm to the touch, easy to clean, UV resistant and fully recyclable. Aglas SAN can be thermoformed easily, which gives manufacturers creative freedom with their design ideas. Characteristics of Aglas SAN cast acrylic sheets: • exceptional glow •...

Aglas SAN Standard sanitary grade cast acrylic sheets developed for sanitary ware applications. Aglas SAN Easy Shaping special sanitary grade cast acrylic sheets modified for higher thermoformability and deep or complex bathtub models. It allows faster production cycles due to shorter heating times and saves energy costs due to lower thermoforming temperatures. We produce Aglas SAN sheets in colours according to colour standards of sanitary ceramic. Colour range is available in current trend in the sanitary field. It matches other European manufacturers colours of sanitary grade materials....

Table 8: Additional properties Aglas SAN and EASY SHAPING Value SAN EASY SHAPING Meas. units Requirement Standard Water absorption capacity Swelling resistance comply No sign comply / of dissolving or gluing 4/5 Grey scale < 3 Resistance to hot water comply Chemical and alkali resistance comply Resistance to damp and dry friction Vicat softening temperature (VST) Rupture strength Thermal stability Without bubbles Additional properties - SIST EN 263 Sanitary ware - baths and shower trays made of cast acrylic sheets Appearance of the Aglas SAN cast acrylic sheets: Aglas SAN cast acrylic...

AGLAS SAN Heating in hot-air ovens Optimal surface temperatures of acrylic sheets at the start of thermoforming process are between 175 °C and 185 °C. The sheets should be heated as uniformly as possible over the whole thickness of the material. It is useful to control the temperature of the sheet surface by an IR thermometer. We do not recommend using higher temperatures as stated. With overheated material, problems during shaping are more likely to occur. Limitations of using lower temperatures are related to the design and quality of the form. In practice it is usual (in ovens with...

temperature 180 °C). As the heating of acrylic sheets depends on circulation of the air and uniformness of the temperatures in the oven, it is recommended to check the temperature of the acrylic sheets before choosing a certain temperature cycle. Heating with the IR heaters Whit this kind of heating it is recommended again that the acrylic sheet surface is heated to 155 °C - 165 °C for the best thermoforming results. Thermoforming by automatic machines with IR heaters means there are higher temperature differences across the sheet than by thermoforming sheets that were previously heated in...

no limited strong attack attack attack CHEMICAL no attack limited strong attack attack Acetic acid, 10 % Acetic acid (glacial) Acetone Amyl acetate Ammonium chloride Ammonium hydroxide Aniline Benzene Calcium chloride Carbon tetrachloride Chloroform Chromic acid, 10 % Chromic acid (conc.) Cyclohexane Dibutyl phthalate Diethyl ether Dimethyl formamide Dioctvl phthalate Ethyl acetate Ethyl alcohol, 10 % Ethyl alcohol, 30 % Ethyl alcohol, 95 % Ethylene dichloride Ethylene glycol Formic acid Gasoline Glycerin Hexane Hydrochloric acid, 20 % Hydrofluoric acid Hydrogen peroxide, 3 % Isooctane...

QUALITY CONTROL Standard protection for AGLAS SAN is a clear thermoformable PE film (several types are avaliable) on the top face of the sheet, other side is not protected. Sheets are packed on wooden pallets protected with multiwall polystyrene on the bottom and on the top of the pallet. Edges of the palette load are protected by cardboard and wrapped with PE strech foil, secured by plastic belts. Akripol’s quality control department performs quality control of all incoming raw materials used in the production. Quality assurance and control is our main concern, so our production process,...

Rights to alternation reserved. The last version of the document is available at www.akripol.si. EN, 09/2017 More informations: Akripol, d.o.o., Aglas sales: Marko Veselič | marko.veselic@akripol.si | m: +386 51 670 202 | t: +386 7 348 1 626 Melita Plantarič | melita.plantaric@akripol.si | t: +386 7 348 1 627 info@akripol.si, www.akripol.si