General Product Catalogue
84Pages

FIRE RATED PRODUCTS creates permanent solutions FIRE RATED PU SEALANT One component, medium modulus polyurethane sealant that cures on exposure to atmospheric humidity and capable of enduring direct flame to certain degrees. FEATURES More than 4 hours of fire resistance in certain conditions without using backfilling materials. Possesses permanent elasticity. No sagging – Thixotropic. No surface tackiness after full cure. Do not pick up dirt. No shrinkage. Enhanced storage stability. Can be applied with hand gun and tooled easily. Paintable. Cures bubble-free 25% movement capability. Conforms...

FIRE RATED SILICONE SEALANT Fire retardant, elastic, neutral curing silicone sealant that cures upon exposure to atmospheric humidity. Absorbs movements up to 25%. FEATURES Flexible and durable. Water, weather and UV resistant. Resistant against Water, Alkaline, Chemical agents. Non corrosive. Solvent free. Air tight sealing. Quick and easy installation. APPLICATION AREAS Fire resistant sealing of connection and expansion joints in constructions. All building and glazing joints which require a fire rating. Suitable for all common building materials. B1 FIRE RATED PU FOAM STRAW / GUN One...

HIGH TACK AST POLYMER AST polymer-based, one component, high quality and professional adhesive with high adhesive strength and initial tack. It is suitable for bonding heavy building materials without the use of clamps and/or fixing tape. FEATURES High initial tack. Eco-friendly, free from isocyanate, solvent, acids and halogens. Excellent primerless adhesion to numerous porous and non-porous substrates. Excellent elasticity, no bubble formation, waterproof, no shrinkage, over-paintable. ”Conforms to the requirements of VOC content specifications in LEED credit EQc4.1 “Low-emitting products”...

creates permanent solutions XPS, EPS and INSULATION PANELS ADHESIVE PU FOAM (Straw) One component aerosol polyurethane adhesive foam curing swiftly with moisture. Providing very fast and powerful adhesion for various construction materials, especially highly recommended for heat insulation systems. FEATURES Powerful adhesion of polystyrene heat panels (XPS and EPS). Ready to mechanical fastening in two hours. More economical. Ready to use in aerosol can. Up to 9m2 heat insulation panel adhesion for each can. Minimum expansion during drying period. After dried, no further expansion and...

ROOF & TILE PU ADHESIVE One component aerosol polyurethane adhesive foam curing swiftly with moisture and specifically formulated for laying roofing tiles, thanks to its characteristics of greater mechanical strength and adhesion to concrete and brick and insulating materials such as polystyrene and cork. FEATURES Powerful adhesion of roofing tiles. Instant adhesion and roof fixing within two hours. Exceptional resistance to wear and to the action of the wind. Not form thermal bridges, thanks to the excellent thermal insulation. Thanks to its modern chemical formulation, it is highly...

creates permanent solutions FAST ADHESIVE Fast Curing Adhesive PU Foam is a professional type, gun grade, ready to use product. It is used for fast and strong bonding of all kinds of construction materials, especially thermal insulation boards. Within 60 seconds, initial adhesion occurs and adheres securely after 5 minutes. FEATURES One component, fast curing, easy to use adhesive foam. 30-40% saves time, because it can be cured and applied quickly according to other insulating processes. It is 30-40% more economical than other insulation processes. Up to 14 m2 heat insulation panel (EPS,...

ARTIFICAL TURF BOND One component, solventless, self leveling, polyurethane based adhesive designed for installation of artificial grass. It is resistant to water, moisture and corrosive materails. Suitable for use in adverse weather conditions. FEATURES One component. Excellent bonding to applied surfaces. Suitable for use in adverse weather conditions. Solvent free. No smell. Durable. APPLICATION AREAS Bonding artificial grass sports ground applications. Bonding rubber sheets to different surfaces such as; concrete, hardboard, chipboard. Bonding metal, ceramic, concrete, wood etc. NO NAIL...

creates permanent solutions 612J ALUMINUM CORNER JOINT PU EXPRESS One-component, fast curing polyurethane based adhesive with high adhesion properties which is exclusively developed for bonding aluminum corner angles, along with all kinds of aluminum materials in building material’s corner joint applications. FEATURES Perfect bonding capability to aluminum surfaces. Low pressing time. Easy to use both in vertical and horizontal surfaces with non-sag properties. Low consumption, economical. Not effected by the moisture. Resistant to weather conditions and chemicals. For both interior and...

PUR WOOD GLUE One-component, fast curing liquid polyurethane adhesive. It possesses high water resistance and bonding strength. FEATURES Easy application, low viscosity. High bond strength. Water resistant (D4-DIN EN204). Can be used on slightly humid surfaces. Resistant to temperature extremes. Resistant to moisture and chemicals. APPLICATION AREAS Fixing and gluing wooden elements to other various porous and non-porous elements as wood, metal, concrete, polystyrene foam etc. Furniture and boat production. All bonding applications that need a high water resistance. Waterproof FAST CURE PUR...

creates permanent solutions HEAVY DUTY PUR MARINE ADHESIVE A one component high viscosity polyurethane based adhesive specially designed to provide marine grade quality for current industry needs. It can be also used in furniture industry DIY projects where you need premium quality. Unlike common polyurethane adhesives, it does not foam up uncontrollably. FEATURES Water-resistant and weatherproof: Withstand temperature and seasonal changes and suitable for both interior and exterior applications. Retards fire. Low-foam. High adhesion strength. Suitable for wood based materials, metals,...

EVA HOT MELT STRAIGHT EDGE BANDING ADHESIVE General purpose synthetic resin and EVA based hotmelt adhesive of thermoplastic characteristic. FEATURES Hot-Melt is used for curved edge banding, coating and massive adhesion operations on all kinds of domestic and foreign edge banding machines, also manually operated machines. It is short open time adhesive. Appropriate when immediate bonding is required. Environmentally friendly. Economical. High green strength. Non-sticky surfaces. Odourless. Easy to use. APPLICATION AREAS It is recommended that ambient temperature should be above 15ºC, air...