Ferrum
8Pages

Ferrum Always on firm ground. Ceramics for the hard everyday life in industry.

Apprenticeship and testing establishment, Weinsberg, Germany

Apprenticeship and testing establishment, Weinsberg, Germany Quality ceramics: an investment that pays of f. Specialists are more efficient. This also applies to the ceramic floor tiles of the series Ferrum, which were especially developed for the extreme requirements of industrial enterprises. The integrally coloured, unglazed split tiles are particularly slip-resistant and thus prevent accidents at work. They are extremely robust and by far more resistant to compression than concrete or coating materials. A technically sophisticated range of accessories including cove skirtings, nosing...

School Centre, Neu-Wulmstor f, Germany Cove skirting, r = 12 mm, 25 x 12,5 cm External angle Mitred pair 91 white Internal angle Terminal piece Gutter tile Floor tile 25 x 12,5 cm 902 grey-white Gutter tile with outlet 1½"

Extruded Ceramic Tiles, Precision, DIN EN 14411, group AI b , unglazed (UGL)* for floor coverings in indoor and outdoor areas (split tiles) Floor Tiles Nosing Tile | | | 1100 | 1160 | 1180 | 1110 | 4822 | | Model number | | | 25 x 12,5 cm | 25 x 12,5 cm | 25 x 12,5 cm | 25 x 12,5 cm | 25 x 12,5 cm | | Nominal dimensions | | | 240 x 115 x 11 mm | 240 x 115 x 14 mm | 240 x 115 x 18 mm | 240 x 115 x 20 mm | 240 x 115/52 x 11 | | Work size mm | | | 33.000/m | 33.000/m | 33.000/m | 33.000/m | 4.000/m | | m /m - pieces | | | 22.869/m | 28.380/m | 35.442/m | 41.679/m | 3.880/m | | m /m - kg | | |...

Laying instructions – E xclusively mechanical stress Preparation of the base The base must be firm, clean and good bearing. Surfaces reducing the adherence and impurities have to be carefully removed. The laying base must be ready for laying, flush and perpendicular according to DIN 18202. Poured asphalt and cement screeds must be primed with PCI Gisogrund*. Cement bases must be sufficiently pre-wetted if subsequent sealing is intended. Sealing Stress class A2 according to the List of building regulations (Bauregelliste) A, part 2: application of the sealing in at least two completely...

Laying instructions – Mechanical and chemical stress Preparation of the base The base must be dry, firm, clean and good bearing. Smooth surfaces must be roughened by shot-peening or slight grinding; impurities reducing the adherence have to be carefully removed. The laying base must be ready for laying, flush and perpendicular according to DIN 18202. Prior to the application of the sealing, the base must be primed with PCI Epoxigrund 390*; after that, a layer of silica sand is spread over the surface. Pointing With PCI Durapox NT* by the grouting or the spraying method. After approx. 5 to...

AGROB BUCHTAL GmbH f JT" ^^y^REEN BUILDING COUNCILs ^^^KV Deutsche Gesellsdiaft fur nadhhalligei Bauen e.V. / * German Sustainable Building Council m GERMAN CERAMIC TILES \ gW ZZL—^^ ^1^—----- ~w.,^„ Qiialk/LVn rjnTr^itnn ^WW German Sustainable Building Council / MEMBER ORGANISATION Und Umwelt e.V. IIAGROB BUCHTAL