Ideas, engineering and manufacture ALL-ROAD EXPANSION JOINTS—AGWJ length of each element makes for easier installation compared to other shorter expansion joints. The joint's elements are connected together with a male-female coupling and secured to the structure with suitable anchor bolts. Advantages of AGWJ expansion joints Corrosion Resistance The steel structure is completely covered in rubber so protecting it from corrosion. Low Noise Thanks to the special design of the rubber cover, the joint produces little noise as vehicles pass over it. Ease of Assembly AGWJ joints are extremely easy to fit; the two metre Special Kerb Units totally hot vulcanised in the factory, can be provided in order to joint the bridge decks along the sidewalls AGWJ joints are entirely waterproof. An additional waterproof strip fixed under the mats collect any exhaust water preventing any leakage. Furthermore, two draining pipes, at both sides of the mat capture water coming from sidewalls. Long Service Life The tough steel reinforcement and special anti-abrasive rubber used to manufacture Agom joints has been designed to withstand the impact of heavy traffic, the action of oil, grease and petrol, and the effects of ageing due to constant exposure to sunlight and temperature changes. Comprehensive Labelling All elastomeric bearings are provided with a non-fading Agom International srl – via Mesero, 12 – 20010 Ossona (MI) the properties of the joint. international standard. order number. date of manufacturing Kerb units Interchangeable The AGWJ is a particularly suitable choice for replacing existing joints Guarantee Agom expansion joint AGWJ are warranted against any defects due to the manufacturing process and raw materials. The warranty cover the products supplied by Agom and expires if the products are incorrectly store, handle, installed and maintain. For the correct installation, please refer to the Agom Expansion Joints installation instructions. Quality Agom expansion joints are designed and manufactured in accordance with the requirements of the new European standard. Agom can also supply expansion joints complying with other standards. Every single component is molded and assembled by fully qualified and trained workers at the Agom factory with regular external inspections according to EN 1337 and under strict ISO 9001:2000 quality control standards. [email protected] – www.agom.it bridge expansion joints Agom AGWJ expansion joints are designed to handle displacements of up to 70 mm between the bridge decks they are fastened to. Entirely waterproof, they are secured to the structure with suitable anchor bolts. The deformable rubber elements are vulcanised bonded with tough steel reinforcements (standard EN 10025). AGWJ joints also allow displacement and rotation of the structure’s parts relative to each other in any direction. mark directly moulded on the rubber outlining

^mK0^mwww Ideas, engineering and manufacture METAL RUBBER ENGINEERING All the expansion joints are manufactured using only high-quality materials: Elastomer material The elastomer used in the moulding process can be polychloroprene (neoprene), natural rubber or SBR rubber depending on the specifications requested. Agom can manufacture also expansion joints with dielectric rubber Ferrous material : The internal vulcanised rolled steel reinforcements are Agom International srl - via Mesero, 12 - 20010 Ossona (MI) Ph: +39 029029111 - Fax: +39 029010201 [email protected] - www.agom.it