FIX-IN AT Technical data sheet PRODUCT AGC FIX-IN AT Adhesive Tape is a 3,2 mm, closed-cell, polyethylene based double sided pressure-sensitive tape. It consists of medium density foam coated on both sides with a rubber based adhesive. It offers very high peel and shear properties and a high initial tack for mounting of AGC Lacobel (T), Matelac (T), Mirox MNGE, Mirox 4Green+, with or without SAFE+ safety backing. AGC FIXIN AT is only to be used indoor, and for initial bonding (first 48 hrs) in combination with AGC FIX-IN SL silicone adhesive. AGC FIX-IN AT is produced in self wound format on a calendered, siliconised white paper liner. MECHANICAL CHARACTERISTICS Base: Thickness: Closed-cell polyethylene foam coated with pressure sensitive rubber based adhesive 3,2 mm Weight excl liner: Shear strength (glass): Peel strength (glass): Temperature resistance: Minimum application temperature: +10°C Resistant to water, detergent and alcohol. Not resistant to aliphatic and aromatic hydrocarbons. 45,9 MJ/kg Resistance: Average gross heat of combustion (EN ISO 1716): CHARACTERISTIC ADHESION WITH SUBSTRATES Metal / Aluminium: Glass / ceramics: Painted surface: Wood / board / paper: Smooth substrate: Rough substrate: Disclaimer: The information and guidelines in this technical data sheet are the result of our tests and experience at the time of its publication, each version of the technical data sheet being identified with reference to its revision date. The newest version of the technical data sheet replaces all preceding versions, the customer being informed that such newest version may contain technical changes that must be taken into consideration in the use of the relevant products. The latest version of the technical data sheet may be consulted on www.agc-yourglass.com or obtained from your local AGC contact upon request. The customer should verify regularly whether any updated version of the technical data sheet exists prior to using the AGC products. Since AGC Glass Europe has no control over the application modalities, we cannot be held responsible or liable for the results and for any damage resulting from improper or non-adaptive use. Since the design and quality of the substrate and the processing conditions are beyond our control, we shall not be liable on the basis of this technical data sheet for damages directly or indirectly resulting from these factors and conditions. We therefore recommend to always perform a test according to specific local circumstances. To the maximum extent permitted by applicable law, AGC Glass Europe reserves the right to modify the characteristics and presentation of its products without prior notice. AGC Glass Europe has prepared the information included in this technical data sheet in good faith and as accurately as possible but may not be held responsible or liable for inaccuracies or printing mistakes. AGC Glass Europe Headquarters – Avenue Jean Monnet 4 – BE1348 Louvain-La-Neuve – Belgium Emergency phone (24/24, 7/7): +32 14 58 45 45 (NL, FR, EN, DE) - www.agc-yourgla

FIX-IN AT Technical data sheet SHELFLIFE 24 months in unopened packaging in a cool and dry storage place at temperatures between +15°C and +25° and +/- 50% relative humidity. Use before expiry date, see packaging. SURFACES Type: all usual construction surfaces, not on soft PVC or non-activated safety foils. SAFE+: with safety foil backings, always use AGC FIX-IN SA as surface activator. State of Surface: clean, dry, free of dust and grease. Remains of old adhesives may affect the adhesion and must be removed mechanically, followed by degreasing. Preparation: prime porous substrates with AGC FIX-IN...