LUXCLEARTM PROTECT For a shower as bright and transparent as on the very first day

Luxclear Protect is a clear glass with an invisible pyrolytic coating (on one side) specially designed for shower applications. Its permanent coating has been specially developed to protect the glass surface and drastically slow the ageing process when in contact with water by preventing the development of a whitish deposit on the glass. Unlike aftermarket products, the Luxclear Protect coating fuses with the glass and permanently seals the surface to prevent the glass from appearing hazy and dull. As a benefit for the end user, Luxclear Protect requires no special cleaning solutions or processes...

For a shower as bright and transparent as on the very first day LUXCLEARTM PROTECT What’s so special about it? What does this mean for you? Long-lasting transparency − Showers will keep their transparent and cleaness and bright appearance for years. Thanks to the coating on the glass surface, Luxclear Protect will remain free of visible corrosion and staining on the coating surface for the life of the product as per AGC’s 10-year no corrosion warranty Permanent coating, − The industrial application of the permanent protection online coating ensures the durability of the glass treatment, making...

Resistance to corrosion: comparative test LUXCLEARTM PROTECT Ageing test in climate chamber Luxclear Protect and standard clear float glass samples were placed in a climate chamber for a period of 14 days. The humidity in the room was kept at a level higher than 98%. The thermal cycle went from 25°C to 45°C in 30 minutes, then from 45°C to 55°C in 1 hour and back to 45°C again in 1 hour. This cycle was repeated 11 times. After that the temperature went back to 25°C in half an hour. Standard clear float Luxclear Protect Visible corrosion Did you know? As glass is made from sand, it contains sodium...

Availability Available in 6, 8 and 10 mm and in 600*321 cm, 225*321 cm and 255*321 cm on Planibel Clearlite. Installation Luxclear Protect must be installed in showers with the coated surface facing the area exposed to water. You can identify the coated side using a tin bath side tester. The coated side is always the opposite side of the tin side. Before sending the sheets of glass to the installers, a sticker indicating the uncoated side should be applied to the glass. AGC Coating Detector and stickers can be ordered on www.agc-store.com. AGC Glass Europe provides technical support to help you...

AGC GLASS EUROPE European Headquarters - T +32 2 409 30 00 - F +32 2 672 44 62 AGC Glass Europe has representatives worldwide. See www.agc-yourglass.com for further addresses.