1. Catalogs
  2. AF Systems
  3. AF SLEEVE B3

AF SLEEVE B3

AF SLEEVE B3

Product catalog summary
Description: AF SLEEVE B3 is an intumescent sleeve designed for sealing corrugated combustible pipe penetrations and formwork bolt openings. It is certified under EN 1366-3 for EI 180 fire resistance.
Direct Application: Suitable for use with electrical cables in corrugated pipes and formwork holes.
Features: The sleeve measures 10000x30x2 mm, expands over 20 times its original volume, activates at approximately 180°C, and generates a pressure of 10 Bar.
Packaging and Storage: Available in 10 m rolls with a 30x2 mm section. It has unlimited shelf life under normal storage conditions.
Application Method:
  • Electrical Cables: Insert the sleeve around the pipe at the penetration and seal with AF PANEL and AF SEAL W.
  • Formwork Holes: Wrap the sleeve to fit the opening diameter and insert it.
Specification: The sleeve provides EI 180 protection for combustible pipes and formwork holes, certified for use with AF PANEL rock wool panels.
Certifications: The product is certified for various wall and ceiling types, including rigid floors and walls (EI 180), self-supporting walls, sandwich walls, plasterboard walls, and membrane false-ceilings (EI 120).
See more

Catalog excerpts

AF SLEEVE B3-1

TECHNICAL DATA SHEET AF SLEEVE B3 Fireproof sleeve for corrugated pipes DESCRIPTION AF SLEEVE B3 is an intumescent sleeve certified under EN 1366-3 for EI 180 sealing of corrugated combustible pipe penetrations and openings left by the extraction of formwork bolts. The strip's thin profile (only 2 mm high) enable its application around the corrugated pipe directly inside the rigid structure. DIRECT APPLICATION Electrical cables in corrugated pipes Formwork holes FEATURES Dimensions: Free expansion: Activation temperature: Pressure generated: PACKAGING AND STORAGE 10 m rolls, 30x2 mm section Unlimited under normal storage conditions APPLICATION METHOD Electrical cables in corrugated pipes 1. Insert AF SLEEVE B3 around the combustible pipe at the penetration; 2. Seal the outer space by applying AF PANEL panels glued and smoothed with AF SEAL W sealant. Formwork holes 1. Wrap the AF SLEEVE B3 around until it reaches the diameter of the opening to be sealed; 2. Insert the "roll" inside the opening to be sealed. SPECIFICATION Supply and application of AF SLEEVE B3 intumescent sleeve, which has an expansive capacity of more than 20 times its initial volume, for up to EI 180 protection of combustible pipes containing electrical cables and sealing of formwork holes. The system is certified for use in combination with semi-rigid AF PANEL rock wool panels. CERTIFICATIONS Class EI 180 (UNI EN 1366-3) Class EI 180 (UNI EN 1366-3) Class EI 120 (UNI EN 1366-3) rigid floor rigid wall plasterboard wall Class EI 120 (UNI EN 1366-3) Class EI 120 (UNI EN 1366-3) Class EI 120 (UNI EN 1366-3) self-supporting wall sandwich wall membrane false-ceiling The information contained in this data sheet is based on our latest knowledge and experience. Under no circumstances can this information imply a guarantee, or responsibility for the misuse of our products, since the conditions of use are not under our control. The technical and performance features in this data sheet are periodically updated. The revision number of this file is indicated in the space below. Any changes can be found on our website www.afsystems.it VERSION.0222

 Open the catalog to page 1

All AF Systems catalogs and technical brochures

  1. AF COLLAR C

    1  Page

  2. AF SLEEVE B

    1  Page

  3. AF COLLAR

    1  Page

  4. AF BRICK

    1  Page

  5. AF BAGS

    1  Page

  6. AF PLUG

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.